Broken and Very Rusted Mill Restoration

This is a Corn Milling Machine type Avimat.
This machine is used to break corn grains.
I found this machine at flea market, it cost me 15 euro.
As you can see is still in a good condition but you need lot of force to mill, i see some machine like this with a engine.
This restoration took me about 5 days and i try to show you only the best parts, behind the scenes was lots of work.
I hope you enjoy it!

you can donate me with paypal:
https://www.paypal.me/tysytube

Index of operation and materials:

00:01 presentation
01:02 start disassembly
03:46 cleaning all the parts with hot water and soap
04:35 removing paint with paint stripper
05:27 removing rust with MC-51 Rust remover
07:37 grinding all the parts to remove rest of paint
08:35 start repairing the missing metal part
09:12 start soldering the metal parts
10:14 grinding the soldering
12:02 apply body filler
13:45 apply primer
15:00 apply blue paint hammerite
15:36 making all the letters with white paint hammerite
18:37 making a new handle
21:37 painting the new handle
22:06 start polishing all the bolts and nuts
22:44 reassembly the handle
23:47 start reassembly the milling machine
27:13 presentation
28:13 testing the milling machine
If you like this restoration please share and subscribe

Disclaimer: I am no professional. I am completely self taught and would appreciate any feedback, advice or constructive criticism and suggestions .
#Milling
#Machine
#Restoration

Видео Broken and Very Rusted Mill Restoration канала TysyTube Restoration