how to make Arduino light meter with nokia 5110 and ldr sensor on proteus

Creating an Arduino-based light meter with an LDR (Light Dependent Resistor) sensor and a Nokia 5110 display in Proteus involves several steps. Here's a high-level overview of the process:

1. Components Required:

**Arduino UNO or compatible board
**Nokia 5110 LCD display module
**LDR (Light Dependent Resistor)
**Resistor (10kΩ for voltage divider)
**Breadboard and jumper wires

2. Circuit Connections:

**Connect one end of the LDR to 5V on Arduino.
**Connect the other end of the LDR to A0 on Arduino.
**Connect a 50kΩ resistor from A0 to GND (to create a voltage divider).
**Connect the Nokia 5110 display to Arduino using SPI communication (SCK, MOSI, D/C, RST, CS).
3. software application
** Arduino ide
**Proteus Professional
for more about
circuit diagram and Arduino code

Telegram channel 👉 https://t.me/smartkembo

Don't forget to subscribe for more and coming projects
For more about electronics projects subscribe now our channel

CONTACT/FOLLOW US ON
👇
INSTAGRAM https://www.instagram.com/smartkembo

FACEBOOK PAGE
https://www.facebook.com/smartkembodiscovery

TIKTOK tiktok.com/@smartkembo

TWITTER https://twitter.com/Smartkembodisco?s=09

TELEGRAM channel https://t.me/smartkembo

WHATSAPP GROUP https://chat.whatsapp.com/KIjSOVkOSTKLm6H4ZbX6LU

LINKEDIN
https://www.linkedin.com/company/smartkembo/
#smartkembodiscoveryscience #proteus8 #arduino
#ldr #nokia5110

Видео how to make Arduino light meter with nokia 5110 and ldr sensor on proteus канала smartkembo discovery science