Conduit Bending: Parallel Kicks Part 1

Chapter 1 - 30° Degree Parallel Kicks (Brief Explanation)
3:08

Chapter 2 - Placing your conduit in the bender properly.
9:23

Chapter 3 - Measuring Your Kicks Accurately.
20:45

Chapter 4 - Parallel Kicks W/Different Size Conduits. (Brief Explanation)
24:17

Chapter 5 - Charting Your Bender.
28:15

Chapter 6 - 30° Degree Parallel Kicks Explained (Detailed)
31:51

Chapter 7 - 45° Degree Parallel Kicks Explained (Detailed)
44:50

Chapter 8 - 60° Degree Parallel Kicks Explained (Detailed)
55:52

Chapter 9 - Parallel Kicks W/ Different Size Conduits. (Detailed)
59:14

Don't forget to follow up with Part 2 & 3.

Parallel Kicks Pt.2
https://youtu.be/OvexMTfrDHE

Kicks - The Measured Method (pt.3 of the Kicks Series)
https://youtu.be/Rqy6dvOWHj4

In this video I will be showing you how to accomplish Parallel kicks. Kicks have a reputation of being easy because it looks simple enough. It's just a 90 degree stub with another bend, right? Well let me tell you that isn't the case. Anyone how has been bending conduit for some time will tell you that when they first started it wasn't that easy. To accomplish parallel kicks every part of it has to be on point are it all comes out wrong. I will be going over Parallel kicks on a 90 degree.
Also will show you how to do parallel kicks with all different size conduits as well. I really hope I explained it good enough for you. As you will watch in the video making any kick is as simple as using the multipliers that you would if you were making an offset. i will show you what i mean in the video. I know this is a long video but I had to make sure I was as detailed as possible so that you could understand how to accomplish these bends. If you want short video's on how to bend conduit, I apologize this channel is not for you. I like to think that I give you more of a class room type setting. I will give you time stamps for the different type of degree kicks if thats all you want to know is how to bend a specific degree of kicks. But I will warn you that you might miss something in the beginning of the video or maybe even the end of it.

Please Donate so I could continue to purchase more conduit and supplies to make more video's:
Paypal.me/melrub480v
Should you have any questions at all you can contact me or follow me on:
facebook - HolmzLaw (best contact)
Instagram - HolmzLaw
Twitter - Holmzlaw@Livewire480V
Email - Melrub480v@Gmail.com (2nd best)

Check out the rest of my playlists:

How to Assemble and Bend w/ Hydraulic and electric benders
https://www.youtube.com/playlist?list=PLOshL7_adwvMUQAhMo02imCTBsrCWeEon

Advanced Conduit Bending Stratgies: This Playlist is more like an Advanced Bending Course. The videos are pretty long and very detailed video's
https://www.youtube.com/playlist?list=PLOshL7_adwvMUQAhMo02imCTBsrCWeEon

Conduit Bending Tips and Tricks:
https://www.youtube.com/playlist?list=PLOshL7_adwvNaLEInj0cHzry4SMRw-c9-

Tool Unboxing and Reviews:
https://www.youtube.com/playlist?list=PLOshL7_adwvOmdqFla9m9aJRh8rqv3j3G

Electrical Code Calculations: This playlist is new and I currently only have one video. Check back in the near future for more video's
https://www.youtube.com/playlist?list=PLOshL7_adwvOmdqFla9m9aJRh8rqv3j3G
#Holmzlaw #parallelkicks #conduitology

Видео Conduit Bending: Parallel Kicks Part 1 канала Holmz Law