TAPPER ANGLE MEASUREMENT UNIT
Комментарии отсутствуют
Информация о видео
16 сентября 2019 г. 0:07:44
00:02:32
Другие видео канала
DIGITAL READOUT UNIT FOR STATIC AND DYNAMIC PARAMETER MEASUREMENTS
BORE CHECKING AIR PLUG GAUGE WITH 5um TOLERANCE
MES - OD 4 LEVEL INSPECTION AIR CALIPER FIXTURE WITH AIR GAUGE UNIT
INTERNAL DIAMETER, OUTER DIAMETER MEASURING FIXTURE WITH COST SAVINGS AIR CUT OFF SYSTEM
AIR CALIPER FIXTURE TO CHECK OUTTER DIAMETER OF SHAFT AT 4 LEVEL
BLIND BORE 1mm CHECKING LAND AIR PLUG GAUGE
AIR ELECTRONIC UNIT TO MEASURING LINEAR / DYNAMIC PARAMETERS
3 LEVEL STEP OD (OUTER DIAMETER) MEASURING AIR GAUGES FIXTURES WITH AIR CUT OFF SENSOR 9566124150
#COMBINED AIR RING GAUGE 9566124150 /9655778807 Info@mesinstruments.co.in
AIR UNIT TO CHECK LINEAR & DYNAMIC PARAMETERS WITH AIR CUT OF
METROLOGY ENGINEERING SOLUTIONS
INNER DIAMETER & OUTER DIAMETER COMBINED AIR GAUGE & LC 0.0001mm / Accuracy 0.001mm & CYLINDRICITY
ROTAR SHAFT 4 DIFFERENT OUTER DIAMETER MEASURING FIXTURE WITH SPC DISPLAY SYSTEM (CP,CPK & RUNCHART)
SHAFT OUTER DIAMETER TAPER GAUGE (LC - 0.0001mm)
#SHAFT OD MEASUREMENT - MULTI GAUGE -DATA SAVER -AIR SAVER - SPC OUTPUTS - OFFSET OUTPUTS- POKE YOKE
AIR SAVING | COST SAVING | QUALITY MEASUREMENT SYSTEM
SPHERE OD & FORM (TIR) CHECKING FIXTURE
AIR PLUG FOR DIA, TAPER, OVALITY & CYLIDERCITY
ID, OD, WIDTH HEIGHT AIR GAUGE UNIT SUITABLE FOR ALL TYPE JETS
AIR GAUGE - ID & OD DIAMETER COMBINATION with Accuracy 0.002mm