etrailer | Redline Trailer Spindles - EZ Lube Spindle - R20384EZ Review
Click for more info and reviews of this Redline Trailer Spindles:
https://www.etrailer.com/Trailer-Spindles/Redline/R20384EZ.html
Check out some similar Trailer Spindles options:
https://www.etrailer.com/dept-pg-Trailer_Spindles-sz-For_3500_lb_Axle.aspx
https://www.etrailer.com
Don’t forget to subscribe!
https://www.youtube.com/user/etrailertv
Full transcript: https://www.etrailer.com/tv-Demo-Redline-Trailer-Spindles-R20384EZ.aspx
Today we're going to be reviewing part number R20384EZ. This is a EZ Lube spindle with a 3-inch stub, that's this portion back here. The spindle is going to have the brake mounting flange welded onto it. You see back here it has a nice consistent weld. It's going to offer a capacity of 1,750 pounds and it's for a 3,500-pound axle. The brake mounting flange is going to have a 4-bolt design.
This is going to be used to attach the brake assembly to your spindle. If we take a measurement, the distance that we have between the holes, it's going to give us a measurement of 2-7/8 of an inch, center-on-center. Square design, so that measurement is going to be consistent between all holes and again, that is center-on-center. This part number is going to include the D-washer, tang washer as well as the castle nut. All three parts are going to be used to hold the hub assembly onto the spindle. The EZ lube spindle is a great design. It's a great system to have in place.
It has a grease zerk fitting here on the end. This is going to allow you to pump grease internally into the spindle simply by attaching your grease gun. Then there's a hole right here on the inner bearing surface where the grease will come out and then the grease will fill the cavity in the hub and lube both the inner and outer bearings. Now, the EZ lube spindle makes it much easier to lube the bearings when compared to a regular spindle with no zerk fitting. That simply just means that you have to remove the castle nut and the hub and then you have to manually grease the bearings. This system is going to allow you to attach a grease gun, pump the grease in and then it's going to lube the bearings simply by pumping the grease into the spindle.
This is designed to be used with a bearing kit. That's going to be sold separately with part number BK2-100. A few measurement that we need to go over real quick. The first one's going to be the stub length. This measurement's taken from the base of the weld to the end of the stub.
It's going to give us 3 inches. The overall length measuring from edge-to-edge, that's going to give us a measurement of 9 inches. If we include the zerk fitting, that's going to increase it to 9-1/4 of an inch. Now the rest of the measurements are very precise. They're actually measured to the hundredths of an inch so we're going to be using a digital caliper to get those readings. The first one's going to be the diameter of the stub, so this portion back here. That's going to give us a measurement of 1.75. The next one is going to be the grease seal. It's going to measure 1.73. The next one's going to be the inner bearing surface, this portion right here. This is going to give us a measurement of 1.38. The next one is the outer bearing surface, 1.06, and then the threaded portion right here is going to measure right at 1 inch. That's going to do it for today's review of part number R20384EZ. This is the EZ Lube Spindle with the 3-inch stub. .
Видео etrailer | Redline Trailer Spindles - EZ Lube Spindle - R20384EZ Review канала etrailer.com
https://www.etrailer.com/Trailer-Spindles/Redline/R20384EZ.html
Check out some similar Trailer Spindles options:
https://www.etrailer.com/dept-pg-Trailer_Spindles-sz-For_3500_lb_Axle.aspx
https://www.etrailer.com
Don’t forget to subscribe!
https://www.youtube.com/user/etrailertv
Full transcript: https://www.etrailer.com/tv-Demo-Redline-Trailer-Spindles-R20384EZ.aspx
Today we're going to be reviewing part number R20384EZ. This is a EZ Lube spindle with a 3-inch stub, that's this portion back here. The spindle is going to have the brake mounting flange welded onto it. You see back here it has a nice consistent weld. It's going to offer a capacity of 1,750 pounds and it's for a 3,500-pound axle. The brake mounting flange is going to have a 4-bolt design.
This is going to be used to attach the brake assembly to your spindle. If we take a measurement, the distance that we have between the holes, it's going to give us a measurement of 2-7/8 of an inch, center-on-center. Square design, so that measurement is going to be consistent between all holes and again, that is center-on-center. This part number is going to include the D-washer, tang washer as well as the castle nut. All three parts are going to be used to hold the hub assembly onto the spindle. The EZ lube spindle is a great design. It's a great system to have in place.
It has a grease zerk fitting here on the end. This is going to allow you to pump grease internally into the spindle simply by attaching your grease gun. Then there's a hole right here on the inner bearing surface where the grease will come out and then the grease will fill the cavity in the hub and lube both the inner and outer bearings. Now, the EZ lube spindle makes it much easier to lube the bearings when compared to a regular spindle with no zerk fitting. That simply just means that you have to remove the castle nut and the hub and then you have to manually grease the bearings. This system is going to allow you to attach a grease gun, pump the grease in and then it's going to lube the bearings simply by pumping the grease into the spindle.
This is designed to be used with a bearing kit. That's going to be sold separately with part number BK2-100. A few measurement that we need to go over real quick. The first one's going to be the stub length. This measurement's taken from the base of the weld to the end of the stub.
It's going to give us 3 inches. The overall length measuring from edge-to-edge, that's going to give us a measurement of 9 inches. If we include the zerk fitting, that's going to increase it to 9-1/4 of an inch. Now the rest of the measurements are very precise. They're actually measured to the hundredths of an inch so we're going to be using a digital caliper to get those readings. The first one's going to be the diameter of the stub, so this portion back here. That's going to give us a measurement of 1.75. The next one is going to be the grease seal. It's going to measure 1.73. The next one's going to be the inner bearing surface, this portion right here. This is going to give us a measurement of 1.38. The next one is the outer bearing surface, 1.06, and then the threaded portion right here is going to measure right at 1 inch. That's going to do it for today's review of part number R20384EZ. This is the EZ Lube Spindle with the 3-inch stub. .
Видео etrailer | Redline Trailer Spindles - EZ Lube Spindle - R20384EZ Review канала etrailer.com
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Replacing damaged trailer spindel](https://i.ytimg.com/vi/kwmOxLE_hIw/default.jpg)
![How To Repack The Bearings On Your 5th Wheel | Grand Design 5th Wheel Bearing Maintenance](https://i.ytimg.com/vi/ZzgJW88Zs_A/default.jpg)
![4 different ways to manually load logs on a wagon - by yourself, using new and old school technics.](https://i.ytimg.com/vi/s0h4i14P0hM/default.jpg)
![OFFROAD TRAILER BUILD #4, AXLE CHOP](https://i.ytimg.com/vi/Biu_6cO0E_U/default.jpg)
![Trailer axle + suspension rebuild.](https://i.ytimg.com/vi/d5StqPApp8E/default.jpg)
![How To Determine Your Trailer Hub Size](https://i.ytimg.com/vi/TajYcbNo428/default.jpg)
![Making a new trailer axle #2021](https://i.ytimg.com/vi/PmeDIQqtYiI/default.jpg)
![How to install a repair sleeve on a trailer axle without special tools.](https://i.ytimg.com/vi/n5x0yahjT2I/default.jpg)
![Tiny House Trailer Build - 3. Axle Fabrication](https://i.ytimg.com/vi/1yyOY7FIbcM/default.jpg)
![HOW TO ACCURATELY PLACE AND SQUARE TRAILER AXLES ] Step by Step instructions](https://i.ytimg.com/vi/N08rpHeQnQA/default.jpg)
![How To Replace RV Trailer Brakes, Hubs, Rotors & Repack Bearing Grease](https://i.ytimg.com/vi/HMifZSj407A/default.jpg)
![Rebuilding a wrecked trailer after a collision part 1](https://i.ytimg.com/vi/rcmyrTlUD1U/default.jpg)
![Ranger Trail Trailer Spindle Replacement](https://i.ytimg.com/vi/LyF2AtcnW4Y/default.jpg)
![Does Your Trailer Need Brakes?](https://i.ytimg.com/vi/_JrK0ht-iek/default.jpg)
![Spindle damage from loose bearings](https://i.ytimg.com/vi/Sq9m-ZyiLjs/default.jpg)
![Boat Trailer Axle Spindle Repair Sleeve](https://i.ytimg.com/vi/SNKL1l567qg/default.jpg)
![Pt.1 Boat Trailer Bearing Service At D-Ray's Shop](https://i.ytimg.com/vi/2_9iBXjhaaM/default.jpg)
![20 Tips to Replace U joints Like a Pro from a Professional Mechanic](https://i.ytimg.com/vi/c2cPZMj6Gvw/default.jpg)
![Trailer axle surgeon](https://i.ytimg.com/vi/XXqs8Fb05Ak/default.jpg)
![Flexiride Rubber Torsion Axles by Universal](https://i.ytimg.com/vi/sEwBhVyP4Io/default.jpg)