TBS Crossfire frequency & region causes failsafe at short range when set incorrectly
Uncertain about what to buy? Check out THE ULTIMATE FPV SHOPPING LIST: https://www.fpvknowitall.com/ultimate-fpv-shopping-list
SUPPORT ME ON PATREON at: http://bit.ly/2Ep5Sia
THIS IS MY FULL TIME JOB. Here are other ways that you can support me: https://www.fpvknowitall.com/support-me/
---
If you bought a Tango 2 in the USA, you may be having failsafes at short range. This is because it ships set to the 868 MHz frequency band, which is not right for the USA. Let's talk about the region and frequency setting, and how to know the right one for you.
How to install TBS Agent Lite on your radio: https://youtu.be/4aZfvu2iUrs
My complete TBS Crossfire and Tracer setup guide: https://youtu.be/zEWlYpDZuS0
--- TABLE OF CONTENTS ---
0:00 - Intro
0:34 - Where to access the region and frequency settings
1:16 - Tango 2 ships with wrong frequency for USA!
1:51 - What do the frequency and region settings do?
2:21 - Why I don't recommend using the "region" setting
2:56 - What do all the "frequency" settings mean? Which should you choose?
5:40 - One final catch. You might need to re-bind.
5:56 - Why would CRSF failsafe at short range?
Видео TBS Crossfire frequency & region causes failsafe at short range when set incorrectly канала Joshua Bardwell
SUPPORT ME ON PATREON at: http://bit.ly/2Ep5Sia
THIS IS MY FULL TIME JOB. Here are other ways that you can support me: https://www.fpvknowitall.com/support-me/
---
If you bought a Tango 2 in the USA, you may be having failsafes at short range. This is because it ships set to the 868 MHz frequency band, which is not right for the USA. Let's talk about the region and frequency setting, and how to know the right one for you.
How to install TBS Agent Lite on your radio: https://youtu.be/4aZfvu2iUrs
My complete TBS Crossfire and Tracer setup guide: https://youtu.be/zEWlYpDZuS0
--- TABLE OF CONTENTS ---
0:00 - Intro
0:34 - Where to access the region and frequency settings
1:16 - Tango 2 ships with wrong frequency for USA!
1:51 - What do the frequency and region settings do?
2:21 - Why I don't recommend using the "region" setting
2:56 - What do all the "frequency" settings mean? Which should you choose?
5:40 - One final catch. You might need to re-bind.
5:56 - Why would CRSF failsafe at short range?
Видео TBS Crossfire frequency & region causes failsafe at short range when set incorrectly канала Joshua Bardwell
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Failsafe HOLD vs NO PULSES | which is right?TBS Agent Lite | if you have Crossfire or Tracer you MUST install this appTBS Tango 2 how to set-up RSSI / LQ / TelemetryCrossfire RSSI not 99? And LQ (2:100 WTF even is that?"Dynamic Idle" the most useful Betaflight feature you never heard ofSix reasons why you should switch to EdgeTX today (I've switched)2 things I hate about TBS Mambo; 20 that I love (no-BS review)TBS Tango 2 very nearly the best radio (UPDATED REVIEW IN COMMENTS)TBS Tango 2 500 mW mainboard upgrade and module bay installAviation attorney analyzes RDQ vs. FAA oral arguments in DC circuit courtCrossfire Antennas | Are you doing it wrong?DJI Crossfire LQ in OSD How ToHow-to Bind TBS Crossfire with Radiomaster TX16s and TBS Crossfire First LookHowto avoid failsafes with crossfireBetaflight GPS Rescue Configuration (my best settings)When your video wire is also a Crossfire antenna // interference only when controller turned on!Ironic When A Switch to Tango 2 Causes A Failsafe👉 Cómo EVITAR los FailSafe en TBS TANGO ll PRO 🤯🤟Drone Controller + Simulator (How To FPV 2020) part 1