Massey Ferguson 135 Multipower # 2 Adjusting the Tappets
In this video I check the tappet clearance on the Massey Ferguson 135 Multipower.
With no1 piston at top dead center you can set tappets, 1,2,3 and 5 and with one full turn of the crank then set no 4 and 6. I was getting mixed up from setting too many 4 cylinder Fergys. lol.
Hello Im Lance (aka Bundy Bear) and doing these videos is my hobby. I do own Queensland Tractor Spares in Australia where I sell parts and offer technical advise to customers.
Parts seen in our videos can be purchased from http://www.queenslandtractorspares.com.au
We have a lot more than we can offer on our web site available to us and in our store. If you dont see what you would like please email info@queenslandtractorspares.com.au and we will help where we can.
I do try and help with technical advise at bundybearsshed@gmail.com if you have a question or are having trouble with your project.
Видео Massey Ferguson 135 Multipower # 2 Adjusting the Tappets канала Bundy Bears Shed
With no1 piston at top dead center you can set tappets, 1,2,3 and 5 and with one full turn of the crank then set no 4 and 6. I was getting mixed up from setting too many 4 cylinder Fergys. lol.
Hello Im Lance (aka Bundy Bear) and doing these videos is my hobby. I do own Queensland Tractor Spares in Australia where I sell parts and offer technical advise to customers.
Parts seen in our videos can be purchased from http://www.queenslandtractorspares.com.au
We have a lot more than we can offer on our web site available to us and in our store. If you dont see what you would like please email info@queenslandtractorspares.com.au and we will help where we can.
I do try and help with technical advise at bundybearsshed@gmail.com if you have a question or are having trouble with your project.
Видео Massey Ferguson 135 Multipower # 2 Adjusting the Tappets канала Bundy Bears Shed
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Massey Ferguson 135 6 Speed Restoration # 80 Fitting New Injectors and Injector PipesTappet setting 3 cylinder MDI engineMassey Ferguson 135 Multipower # 3 Removing the Lift CoverMaking a Ferguson Tractor Wet Sleeve Puller Part 1 The Lathe Work.Old Mechanic Taught Me This Trick To Removing Rusty Exhaust Manifold Bolts!Sparex Ferguson TEA20 # 6 Removing the LinersChanging cylinder sleeves on a perkins 152 / Massey 231Perkins 3.152 After Cylinder Head Rebuild 3Sparex Ferguson TEA20 # 14 Measuring the new liners in the blockMassey Ferguson 135 6 Speed Restoration # 75 Fitting and Adjusting the Clutch AssemblyTappet clearance,/valve clearance//डीजल पम्प के साथ ट्रैपिट सेटिंग//देसी अंदाज // tractor repairing3 cylinder valve-tappet clearance or how to tune-up 3 cylinder engine without timing markMassey Ferguson 135 Multipower #1 Replacing the Rear Axle Seals and BearingsFerguson FE35 Grey and Gold Restoration Part 15 Setting the Tappets (Rockers)Massey Ferguson Hydraulic Repair, Easy Step-by-Step TutorialInstalling the head and head gasket on a Perkins 152 /MasseyMF135 Restoration #7 Timing and Removing the Injection PumpAdjusting the valve clearance of a four cylinder MF35Sparex Ferguson TEA20 # 21 Fitting Piston AssembliesInstalling timing gears and cover on a perkins 152