PolyLight realtime DMX driven backlighting (prototype recording)
This is an early prototype recording of my DMX stage backlight project, designed to back light a stage projector at a demoparty. Apologies for the poor audio quality in this video, and the buzzing from my phone. This was a rough recording made late at night.
Hardware is an Arduino Mega2560 + NodeMCU WiFi Shield + Tinkerkit DMX shield connected to four LED PAR cans (QTX PAR56).
Software uses DXGI to sample screen at the full resolution and present rate, while using only ~5% CPU on a 4790K, even at 4K resolution capture.
This project was completed and showcased at NOVA 2017: http://novaparty.org/
Demo shown is Ziphead by CNCD & Fairlight: https://www.youtube.com/watch?v=Y_lm0cZOkeA
Видео PolyLight realtime DMX driven backlighting (prototype recording) канала Graham Sutherland
Hardware is an Arduino Mega2560 + NodeMCU WiFi Shield + Tinkerkit DMX shield connected to four LED PAR cans (QTX PAR56).
Software uses DXGI to sample screen at the full resolution and present rate, while using only ~5% CPU on a 4790K, even at 4K resolution capture.
This project was completed and showcased at NOVA 2017: http://novaparty.org/
Demo shown is Ziphead by CNCD & Fairlight: https://www.youtube.com/watch?v=Y_lm0cZOkeA
Видео PolyLight realtime DMX driven backlighting (prototype recording) канала Graham Sutherland
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Coding a video DJ tool - Episode 1: Intro to the Theia codebaseMicrocorruption Embedded Security CTF Stream [2019-11-26]Custom LED backlight project (2015)Audio reactive EL WireIs It Bill Bailey - Eye WitnessesRGBW LEDs over RS485 - Part 2: PCB work - Electronics Live Stream (2021-01-10)Trashpanda by Logicoma (PC 64k Intro) - 2018 [4K / 60fps]Horizon - Dance With The Dead (Rammstein Mashup)h0ffman DJ set with laser visuals by Polynomial - NOVA Demoparty 2020Microcorruption Embedded Security CTF Stream [2019-11-29]Philips PM3070 Cathode Ray Oscilloscope RepairThe Outline Bar Invite [2021] - Polynomial ^ DSSWorking on CPUID Visualiser (2021-11-15)Giving a Quick 100-4C Solder Bath a bathRGBW LEDs over RS485 - Part 1: Design work - Electronics Live Stream (2021-01-09)Designing a haze meter - Electronics live stream (2021-10-18)2021-12-14 - 3D modelling a robot drone in Fusion 360, in ridiculous detailCurrent sense amplifier frontend design for 16 channel mains power monitorRGBW LEDs over RS485 - Part 3: Finishing the PCB - Electronics Live Stream (2021-01-16)