TWO POINT PERSPECTIVE - Questions and MEMO Discussion - EGD Grade 12
Team HowToEGD!! This is it, your last opportunity to absolutely SMACK your final exams!
I champion you and I know that with determination and hard work you can absolutely SMACK your upcoming Prelims and Finals.
My FINAL advice to you: Draw - Draw - Draw as many drawings you can under similar time constraints to what you will have in the exams.
SUGGESTED TIME BREAKDOWN FOR PRACTISE DRAWINGS
15min for Analytic Questions
30-35min for all other drawings such as Isometric, Two Point, Etc.
90min for all Civil and Mechanical Assembly Drawings
You will not have more time than what I am referring to above, therefore, please do not in your preparation use more time than stated above. You have to practice until you can finish these drawings within the given time frames,
PREVIOUS EGD EXAM PAPERS - FREE DOWNLOADS WITH MEMO'S
To further assist you, please download the previous EGD exam papers here.
https://drive.google.com/drive/folders/1dIBCeyuX7LkZjmMzRr9zD7OE3MVKWSqG?usp=sharing
All the best!
Now it really is your turn.
Видео TWO POINT PERSPECTIVE - Questions and MEMO Discussion - EGD Grade 12 канала Stefan Kleyn
I champion you and I know that with determination and hard work you can absolutely SMACK your upcoming Prelims and Finals.
My FINAL advice to you: Draw - Draw - Draw as many drawings you can under similar time constraints to what you will have in the exams.
SUGGESTED TIME BREAKDOWN FOR PRACTISE DRAWINGS
15min for Analytic Questions
30-35min for all other drawings such as Isometric, Two Point, Etc.
90min for all Civil and Mechanical Assembly Drawings
You will not have more time than what I am referring to above, therefore, please do not in your preparation use more time than stated above. You have to practice until you can finish these drawings within the given time frames,
PREVIOUS EGD EXAM PAPERS - FREE DOWNLOADS WITH MEMO'S
To further assist you, please download the previous EGD exam papers here.
https://drive.google.com/drive/folders/1dIBCeyuX7LkZjmMzRr9zD7OE3MVKWSqG?usp=sharing
All the best!
Now it really is your turn.
Видео TWO POINT PERSPECTIVE - Questions and MEMO Discussion - EGD Grade 12 канала Stefan Kleyn
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Introduction to THIRD ANGLE Orthographic Projection - HSE | Page 6-1 | Grade 10](https://i.ytimg.com/vi/t4mD2dwltiQ/default.jpg)
![Do you know these Mechanical Components? HSE | Page 2-1 to 2-3 | Grade 11](https://i.ytimg.com/vi/hkU-QhGX7L0/default.jpg)
![How to GET 100% in MOST SUBJECTS!!! - Must watch for Grade 10-12 learners!](https://i.ytimg.com/vi/6_KG4HTX-Tg/default.jpg)
![How to Draw a Freehand Concept - Grade 10 PAT](https://i.ytimg.com/vi/k_uSgiHeSzQ/default.jpg)
![EASIEST Geometrical Construction TECHNIQUES - HSE | Page 4-2 | Grade 10](https://i.ytimg.com/vi/0ysDrcnrsS0/default.jpg)
![STUNNING Take Off From Cape Town](https://i.ytimg.com/vi/2HyTQDt_H6o/default.jpg)
![SWIVEL HEAD Mechanical Assembly - HSE | Page 2-17 | Grade 12](https://i.ytimg.com/vi/8cu9Uh4vS7I/default.jpg)
![How to draw an Isometric Drawing - HSE | Page 5-8 | Grade 12](https://i.ytimg.com/vi/ph8xPiJgQz4/default.jpg)
![How to draw an Isometric Drawing - HSE | Page 3-12 | Grade 11](https://i.ytimg.com/vi/8Khmyv3AgBI/default.jpg)
![EXAM HACKS everyone should DO - But Don't](https://i.ytimg.com/vi/m9VqD_ULmlY/default.jpg)
![Grade 11 - CIVIL Practical Assessment Task - Part 1](https://i.ytimg.com/vi/oPY3i9m98Pc/default.jpg)
![Become an EGD Master: Get Your Hatching Right!!](https://i.ytimg.com/vi/m6ZSF6wY2jw/default.jpg)
![How to draw a Two Point Perspective - HSE | Page 4-17 | Grade 12](https://i.ytimg.com/vi/q3MbGcDMqSs/default.jpg)
![HOW TO draw a THIRD ANGLE Orthographic Projection - HSE | Page 6-11 | Grade 10](https://i.ytimg.com/vi/3qu3q1T1yKo/default.jpg)
![HOW TO DRAW a Drilled and Tapped M24 HOLE - HSE - Page 2-6 - Grade 11](https://i.ytimg.com/vi/yqkAmRs3sts/default.jpg)
![Become an EGD Master: EGD Paper 2 - GARUNTEED FREE MARKS - Must Watch](https://i.ytimg.com/vi/lNNm3cHNX5A/default.jpg)
![How to draw an Isometric Drawing - HSE | Page 7-13 | Grade 10](https://i.ytimg.com/vi/TNiT_pHYFTI/default.jpg)
![EASIEST WAY to divide a line into EQUAL PARTS!](https://i.ytimg.com/vi/7QapBIcFQgc/default.jpg)
![How to ANSWER a Civil Analytics Question - HSE | Page 5-4 and 5-5 | Grade 11](https://i.ytimg.com/vi/14Cpwl-i1OQ/default.jpg)
![How to draw an Isometric Drawing - HSE | Page 5-2 | Grade 12](https://i.ytimg.com/vi/dqc3OIVec4s/default.jpg)
![How to draw a Two Point Perspective - HSE | Page 4-1 | Grade 11](https://i.ytimg.com/vi/6BBQVAD145Q/default.jpg)