Affordable DIY Fume Laser Fume Extractor that actually WORKS!
Commercial Fume Extractors are super expensive! DIY Fume Extractors are hit and miss. This one actually works! What's the secret? It uses commercial BOFA filters. That makes it a little expensive to operate, as filters alone are just under $450. However this is first fume extractor I had that eliminated all laser cutting odors in my basement. See how I made it and you can too.
I want to give credit and huge thanks to Brandegee Pierce (https://youtu.be/P8zQIargAF4) as it was mostly his idea, and I just built upon it.
========================================================
:::: Please Check out my Online Shop: http://lensdigital.com/shop ::::
========================================================
3D Model (STEP) and Plywood Cuts (DXF) :
https://grabcad.com/library/diy-bofa-laser-fume-extractor-1
Parts (Some Affiliate Links):
- BOFA AD350 Filter (https://www.matterhackers.com/store/l/bofa-filter-for-ad350-fume-extractor-combined-filter/sk/M96DAG1M)
- BOFA AD350 Pre-Filter (https://www.matterhackers.com/store/l/bofa-filter-for-ad350-fume-extractor-pre-filter/sk/MWDHADDX)
- 1/2" Maple Plywood (https://www.lowes.com/pd/Top-Choice-1-2-in-HPVA-Maple-Plywood-Application-as-4-x-8/1000789166)
- 2" x 2" or 2" x 3" boards (5 ft)
- Two 6" Inline Duct Fans (https://amzn.to/2ZURIkY)
- 6" Duct Flange (https://amzn.to/2VZBbrY)
- 1" wide High density Foam insulation tape (https://amzn.to/2NBdjpG)
- Thin foam weather strip (https://amzn.to/2Cc1FiM), goes between top and bottom halves
- Caulk (https://amzn.to/2AIPdXy)
- 3D Printed Handles (https://www.thingiverse.com/thing:4316243)
- Two Latches aprox. 3.5" long (https://www.ebay.com/itm/112752436891)
- Two 2" locking casters (https://www.lowes.com/pd/TITAN-2-in-Rubber-Swivel-Caster/3026959)
Видео Affordable DIY Fume Laser Fume Extractor that actually WORKS! канала Made In Basement
I want to give credit and huge thanks to Brandegee Pierce (https://youtu.be/P8zQIargAF4) as it was mostly his idea, and I just built upon it.
========================================================
:::: Please Check out my Online Shop: http://lensdigital.com/shop ::::
========================================================
3D Model (STEP) and Plywood Cuts (DXF) :
https://grabcad.com/library/diy-bofa-laser-fume-extractor-1
Parts (Some Affiliate Links):
- BOFA AD350 Filter (https://www.matterhackers.com/store/l/bofa-filter-for-ad350-fume-extractor-combined-filter/sk/M96DAG1M)
- BOFA AD350 Pre-Filter (https://www.matterhackers.com/store/l/bofa-filter-for-ad350-fume-extractor-pre-filter/sk/MWDHADDX)
- 1/2" Maple Plywood (https://www.lowes.com/pd/Top-Choice-1-2-in-HPVA-Maple-Plywood-Application-as-4-x-8/1000789166)
- 2" x 2" or 2" x 3" boards (5 ft)
- Two 6" Inline Duct Fans (https://amzn.to/2ZURIkY)
- 6" Duct Flange (https://amzn.to/2VZBbrY)
- 1" wide High density Foam insulation tape (https://amzn.to/2NBdjpG)
- Thin foam weather strip (https://amzn.to/2Cc1FiM), goes between top and bottom halves
- Caulk (https://amzn.to/2AIPdXy)
- 3D Printed Handles (https://www.thingiverse.com/thing:4316243)
- Two Latches aprox. 3.5" long (https://www.ebay.com/itm/112752436891)
- Two 2" locking casters (https://www.lowes.com/pd/TITAN-2-in-Rubber-Swivel-Caster/3026959)
Видео Affordable DIY Fume Laser Fume Extractor that actually WORKS! канала Made In Basement
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Boss Laser Mirrors Alignment Instructions](https://i.ytimg.com/vi/Tum5LHJgdEU/default.jpg)
![DIY Laser Cutter Air Filter](https://i.ytimg.com/vi/BTTTxA3fuNQ/default.jpg)
![DIY Meets High End Fume Extractor for Laser Engraving/Cutting](https://i.ytimg.com/vi/P8zQIargAF4/default.jpg)
![DIY WELDING FUME EXTRACTOR](https://i.ytimg.com/vi/IVJ_DWGJ538/default.jpg)
![CNC Laser - Part 2 - Smoke Extractor](https://i.ytimg.com/vi/bpqIB5VZprw/default.jpg)
![Battle of Lasers! Glowforge vs Chinese CO2 Laser Cutters (Trigger Warning)](https://i.ytimg.com/vi/V36JgsxQ4vU/default.jpg)
![DIY Air Cleaner and Dust Filter](https://i.ytimg.com/vi/OVVGExTGCl8/default.jpg)
![Glowforge Air Filter - A Closer Look](https://i.ytimg.com/vi/BAIpOq1C5cc/default.jpg)
![Solder FUME Extractor DIY | With active carbon filter | Air purifier](https://i.ytimg.com/vi/XX4SCQHQqqQ/default.jpg)
![How To Make Activated Carbon from Charcoal](https://i.ytimg.com/vi/pRwP-6CKFT8/default.jpg)
![How I Make Money Laser Cutting: A Beginner's Overview](https://i.ytimg.com/vi/cf7nFXIm0kQ/default.jpg)
![Fume Extractor Overview](https://i.ytimg.com/vi/XPF2pnS-t58/default.jpg)
![How to BUY a 50W Laser? A basic buying and modification guide](https://i.ytimg.com/vi/1BI1z0D60n8/default.jpg)
![Earned $1700 First Month Laser Engraving With This One Simple Project! GlowForge Starter Project!](https://i.ytimg.com/vi/yVQa5aEE-YQ/default.jpg)
![Fume Extractor DIY](https://i.ytimg.com/vi/TCBv_tKMJgM/default.jpg)
![DIY "Activated Carbon" Air Purifier! The "5 Gal. Bucket" All-Odor Air Cleaner! ~ smoke, smog, fumes](https://i.ytimg.com/vi/hA9NrxF0-Gs/default.jpg)
![VERY QUIET Exhaust Fan For Laser Cutting Machines, Just a Friendly Suggestion](https://i.ytimg.com/vi/QamwNgxiCQI/default.jpg)
![How to make a fume extractor // Axiom Precision CNC Laser](https://i.ytimg.com/vi/tQL9j_e3WC4/default.jpg)
![Fume Extractor & Industrial Air Filtration System FA2 by Fumex - how to change filter](https://i.ytimg.com/vi/aqjYaDW8cMc/default.jpg)
![Making A Fume Hood for my EleksDraw Laser Engraver](https://i.ytimg.com/vi/QF5J-QYrgsk/default.jpg)