Tote bag with zipped pocket divider sewing tutorial - using 3 fat quarters

This is a stylish tote bag with lots of pockets (9 pockets in total) featuring a zipped pocket divider. Below is the list of supplies and cutting instruction.
You may also find the written directions on my blog post here http://bit.ly/totebagwithzippeddivider

Finished bag measurements approx 12.5" wide x 10" tall x 4" deep.

Supplies
3 Fat Quarters (or 1/3 yard of each fabric if using yardage) https://amzn.to/2NgwPbt
2 yards lining fabric
2 yards fusible woven interfacing (20" wide) https://amzn.to/2NgwPbt
Fusible fleece (thermolam) 22" x 21" https://amzn.to/35CTs04
Soft n Stable (1/4" thick sew in foam stabilizer) 34" x 4" https://amzn.to/35coDjD
2 x size 3 zipper at least 11" long https://amzn.to/2sYitWq
10" long elastic (1/4" wide) https://amzn.to/35GrNeN
1 set of magnetic snap https://amzn.to/31KnvC2
Basic sewing notions

Disclaimer : The above links are Amazon affiliate links, thank you for your support!

==========================================================

Cutting instruction

~FRONT EXTERIOR ZIPPER POCKET~

From Fabric 1 :
7" x 3" (upper panel) cut 1x
7" x 8 1/2" (lower panel) cut 1x

From fusible woven interfacing:
7" x 3" (upper panel) cut 1x
7" x 8 1/2"" (lower panel) cut 1x

From Lining Fabric:
7" x 8 1/2" (lining 1 for lower panel) cut 1x
7" x 11 1/2" (lining 2 for the whole zipper panel) cut 1x

***For the zipper tabs 3" x 1" (cut 2x) from fabric 1

===============================================

~FRONT EXTERIOR SIDE PANELS~

From Fabric 2:
3" x 11 1/2" (cut 2x)

From fusible woven interfacing:
3" x 11 1/2" (cut 2x)
~BACK EXTERIOR SLIP POCKET~

From Fabric 1
11" x 8 1/2" (cut 1x)

From fusible woven interfacing
11" x 8 1/2" (cut 1x)

From lining fabric
11" x 8 1/2" (cut 1x)
~BACK EXTERIOR PANEL~

From fabric 3
11" x 4" (upper) cut 1x

From lining fabric
11" x 8" (lower) cut 1x

From Fusible woven interfacing
11" x 11 1/2" (cut 1x)

***Fusible Fleece for the front and back exterior 11" x 10 1/2" (cut 2x)

~SIDE GUSSET~

From Fabric 2
5" x 11 1/2" (cut 2x)

From Fusible woven interfacing
5" x 11 1/2" (cut 2x)

From Soft n stable
4" x 10 1/2" (cut 2x)

~BOTTOM GUSSET~

From Fabric 3
5" x 11" (cut 1x)

From fusible woven interfacing
5" x 11" (cut 1x)

From Soft n Stable
4" x 10" (cut 1x)

~EXTERIOR SIDE POCKETS~

From Fabric 3
7" x 8" (cut 2x)

From lining fabric
7" x 8" (cut 2x)

Cut 2x elastic 5" long each

~POCKET DIVIDER~

From lining fabric
11" x 8 1/2" (cut 4x)

From fusible woven interfacing
10" x 7 1/2" (cut 4x)

***For zipper tabs 3" x 1" (cut 2x) from the lining fabric

~INTERIOR SIDE GUSSET~

From lining fabric
3" x 11 1/2" (cut 4x)

~INTERIOR BOTTOM GUSSET~

from lining fabric
3" x 11" (cut 2x)

~INTERIOR FRONT & BACK PANELS~

From lining fabric
11" x 11 1/5" (cut 2x)

~INTERIOR SLIP POCKETS~

From lining fabric
11" x 7" (cut 4x)

~STRAPS~
Cut by joining left over fat quarters or use a solid fabric 26" x 4" (2x)
Fusible woven interfacing 26" x 2" (2x)

**If you are more familiar with the metric system, I have put together a metric conversion guide for sewing that you may refer to in PDF format here : https://bit.ly/metricconversionguide

Stay in touch
Instagram : https://www.instagram.com/yoansewingstudio/
Facebook :https://www.facebook.com/yoansewingstudio/
Pinterest : https://www.pinterest.com/yoansewingstudio
Website : https://www.yoansewingstudio.com

*Subscribe to receive newsletter http://eepurl.com/gQ_3wT

Thanks for watching and consider subscribing so you won't miss any upload

Music credit ready to go
Music licensed by Mixaund
Ready To Go by Mixaund | https://mixaund.bandcamp.com
Music promoted by https://www.free-stock-music.com

Видео Tote bag with zipped pocket divider sewing tutorial - using 3 fat quarters канала Yoan Sewing Studio