엘스코 코실 설명 및 데모 ( LSCO thread explanation & tutorial video ) 엘라스티 ELASTY
코는 L자니까 엘스코
- 제대로 효과내는 시술 Tip : 추천 엘스코 4줄~6줄 + 필요시 필러 ~0.5cc
- 더 많은 전후 사진 강남언니 "엘스코" 검색 or 인스타
https://www.instagram.com/lsco_official/?locale=ko-KR
01:11 엘스코 캐눌라 1st, 2nd, 3rd 마커에 대한 설명
02:38 본터치 방식의 설명
03:12 세컨마커 (3rd 마커터치) 방식의 설명
03:34 엘스코 총 4줄 사용했을때의 모양 설명
04:10 필러 동반 사용
05:44 엘스코 시술 Live 영상 시작.
06:05 본터치 방식의 시술 영상.
07:55 세컨마커(3rd 마커터치) 방식의 시술 영상.
기존실 대비 엘스코 장점 ★
1. 돌출 X / 2. 유지기간 길다 ( thread work as filler 컨셉) / 3. 코 끝 효과 굿( L directly support tip )
FAQ1 : 마지막에 캐눌라 빼면 실이 조금 나옵니다.
: 콧대 시술 후 캐눌라를 뺄때 잘 눌러서 실을 고정시켜주고 빼면 예방됩니다. 그 과정에서 실이 잘 고정되지 못하고 뒤늦게 고정되는 경우는 실이 조금 나오게 됩니다.
FAQ2 : 마지막에 캐눌라를 빼면 L자 부분이 조금 빠져나옵니다
: 비주가 얕게 삽입된 경우거나, 비주실이 고정이 뒤늦게 되면서 얕게 삽입된 것 처럼 된 경우.
충분한 깊이 이상(3rd marker touch) 삽입이 필요하며, 잘 눌러 고정시켜주고 빼면 예방됩니다.
★단 펑쳐사이트에 L자고리가 가까이 위치하게 되어 실이 보이는 것은
1. 굳이 실을 제거 하지 않고, 다음 실을 넣을때 같이 밀어넣는 식으로 처리할 수있다.
2. 코를 몰딩하듯 앞쪽, 위쪽으로 당겨 깊게 위치시켜 조직으로 덮게되면 안보이게 될 수 있다.
3. 시술이 끝나도 보이게되면 고리에 캐눌라를 넣어 걸어 당기는 식으로 당겨 컷팅.
쉽게 제거 가능함.
FAQ3 : 비주에 넣고 뺄때 너무 과하게 빼서 코그가 나오면 어떻게 하나요?
: 무균적으로 집어 넣으시고 시술하시면 됩니다. 4cm 정도가 이상적이지만, 3cm이상 뺀다는 생각으로 빼시면 됩니다. 너무 걱정하지 마시고 3cm이상만 빼시면 콧대로 진입하셔도 됩니다.
감사합니다.
데모 및 구입 문의 이동환 과장 010-5637-5052 / 최의범 대리 010-8082-8704
ELASTY동방메디컬 제품
LSCO not only Lift but also Fill, Nose is L-shaped, LSCO
- Tips (know-how) for how to do LSCO properly.
- Recommendation : 4 ~ 6 threads of LSCO + 1 cc of filler if needed.
★Strength compared to conventional thread.
1. almost 0 Zero protrusion
2. Relatively long lasting tip projection ( not only Lift but Fill )
3. Good nasal tip projection ( L-shaped directly fill & support tip )
FAQ1 : when I take out the cannula at the end, the thread comes out a little.
A1 : lsco dorsum part should be fixed at the right position by pressing before withdrawal of cannula at the dorsum part.
FAQ2 : when I take out the cannula at the end, the L-shaped structure comes out a little. why does it happen??
A2 : it can happen when you insert thread not deep enough or not fixed at the right position.
1 Most cases, It does not need to be removed , it can be buried in when you insert next thread deeper.
2. If you stretch the nose forward and upward and push it deeply and cover it with tissue, it may become invisible.
3. If you see it even after all the procedure is over, put a cannula in the visible loop and pull it out and cut it.
Thank you.
Your success is our success.
Miracu / Benev distributor
ELASTY Dongbang Medical Products
Видео 엘스코 코실 설명 및 데모 ( LSCO thread explanation & tutorial video ) 엘라스티 ELASTY канала SLS
- 제대로 효과내는 시술 Tip : 추천 엘스코 4줄~6줄 + 필요시 필러 ~0.5cc
- 더 많은 전후 사진 강남언니 "엘스코" 검색 or 인스타
https://www.instagram.com/lsco_official/?locale=ko-KR
01:11 엘스코 캐눌라 1st, 2nd, 3rd 마커에 대한 설명
02:38 본터치 방식의 설명
03:12 세컨마커 (3rd 마커터치) 방식의 설명
03:34 엘스코 총 4줄 사용했을때의 모양 설명
04:10 필러 동반 사용
05:44 엘스코 시술 Live 영상 시작.
06:05 본터치 방식의 시술 영상.
07:55 세컨마커(3rd 마커터치) 방식의 시술 영상.
기존실 대비 엘스코 장점 ★
1. 돌출 X / 2. 유지기간 길다 ( thread work as filler 컨셉) / 3. 코 끝 효과 굿( L directly support tip )
FAQ1 : 마지막에 캐눌라 빼면 실이 조금 나옵니다.
: 콧대 시술 후 캐눌라를 뺄때 잘 눌러서 실을 고정시켜주고 빼면 예방됩니다. 그 과정에서 실이 잘 고정되지 못하고 뒤늦게 고정되는 경우는 실이 조금 나오게 됩니다.
FAQ2 : 마지막에 캐눌라를 빼면 L자 부분이 조금 빠져나옵니다
: 비주가 얕게 삽입된 경우거나, 비주실이 고정이 뒤늦게 되면서 얕게 삽입된 것 처럼 된 경우.
충분한 깊이 이상(3rd marker touch) 삽입이 필요하며, 잘 눌러 고정시켜주고 빼면 예방됩니다.
★단 펑쳐사이트에 L자고리가 가까이 위치하게 되어 실이 보이는 것은
1. 굳이 실을 제거 하지 않고, 다음 실을 넣을때 같이 밀어넣는 식으로 처리할 수있다.
2. 코를 몰딩하듯 앞쪽, 위쪽으로 당겨 깊게 위치시켜 조직으로 덮게되면 안보이게 될 수 있다.
3. 시술이 끝나도 보이게되면 고리에 캐눌라를 넣어 걸어 당기는 식으로 당겨 컷팅.
쉽게 제거 가능함.
FAQ3 : 비주에 넣고 뺄때 너무 과하게 빼서 코그가 나오면 어떻게 하나요?
: 무균적으로 집어 넣으시고 시술하시면 됩니다. 4cm 정도가 이상적이지만, 3cm이상 뺀다는 생각으로 빼시면 됩니다. 너무 걱정하지 마시고 3cm이상만 빼시면 콧대로 진입하셔도 됩니다.
감사합니다.
데모 및 구입 문의 이동환 과장 010-5637-5052 / 최의범 대리 010-8082-8704
ELASTY동방메디컬 제품
LSCO not only Lift but also Fill, Nose is L-shaped, LSCO
- Tips (know-how) for how to do LSCO properly.
- Recommendation : 4 ~ 6 threads of LSCO + 1 cc of filler if needed.
★Strength compared to conventional thread.
1. almost 0 Zero protrusion
2. Relatively long lasting tip projection ( not only Lift but Fill )
3. Good nasal tip projection ( L-shaped directly fill & support tip )
FAQ1 : when I take out the cannula at the end, the thread comes out a little.
A1 : lsco dorsum part should be fixed at the right position by pressing before withdrawal of cannula at the dorsum part.
FAQ2 : when I take out the cannula at the end, the L-shaped structure comes out a little. why does it happen??
A2 : it can happen when you insert thread not deep enough or not fixed at the right position.
1 Most cases, It does not need to be removed , it can be buried in when you insert next thread deeper.
2. If you stretch the nose forward and upward and push it deeply and cover it with tissue, it may become invisible.
3. If you see it even after all the procedure is over, put a cannula in the visible loop and pull it out and cut it.
Thank you.
Your success is our success.
Miracu / Benev distributor
ELASTY Dongbang Medical Products
Видео 엘스코 코실 설명 및 데모 ( LSCO thread explanation & tutorial video ) 엘라스티 ELASTY канала SLS
Комментарии отсутствуют
Информация о видео
25 июля 2024 г. 14:49:36
00:10:08
Другие видео канала