#50 using a laser to strike the waterline
There's quite a lot going on in this update as I move closer to painting Wanda. I spend some time levelling the boat, and have a dilemma on finding an accurate horizontal reference for Wanda. I use a laser leveller to strike the waterline, and review the issue with the compression under the mast base and the slope in the cockpit seating. And I find the mother of all heaters!
Видео #50 using a laser to strike the waterline канала A boat called wanda
Видео #50 using a laser to strike the waterline канала A boat called wanda
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
#51 Closing thru hulls and other unwanted holesHow to measure and cut a straight Boot Stripe on the WaterlineTraum Gebrauchtboot – Folge 3: Unterwasserschiff bearbeitenHow to strike a straight waterline on your boat#77 - New coachroof handrailsI Cast and Turned Cardboard Packing Material - You'll Never Believe The Results#72 - Painted & moved!#61 DIY Grit blasting the bilgeWharram Cat’. How To Replace Standing Rigging with Synthetic (DYNEEMA). The Costs. Part Two. [Ep27]Laser level vs Water level | Which is more accurate?Spray on Countertops | Stone Coat EpoxyHow To Install Stair Handrail On Stairs : DIY WALNUT RAIL WITH MOTION SENSOR LIGHT#52 closing thru hulls part two#69 Hi tech spacers using low tech tools#48 Engine lift, more troubles?How To Paint A Straight WaterlineMarking the waterline and painting the hull; Building a cruising sailboat - SV Tapatya EP147#56 time to finish this beast!Gelcoat And Epoxy Bonding Results!Haven 12 1/2 - Finding the Waterline - Episode 50