Mig Welding Techniques Tested
This video shows mig welding techniques as well as push vs pull tests.
A good way to test for penetration is the cut and etch test.
If the test is done while the weld is still fresh on you mind, there is a lot that can be learned and welding technique can be adjusted and improved.
I used a lincoln electric power mig 210mp for the first welds with settings of 19 volts and 310 inches per minute of wire speed using .030" diameter er70s6 wire.
For welding accessories, visit my store https://weldmongerstore.com/
Видео Mig Welding Techniques Tested канала weldingtipsandtricks
A good way to test for penetration is the cut and etch test.
If the test is done while the weld is still fresh on you mind, there is a lot that can be learned and welding technique can be adjusted and improved.
I used a lincoln electric power mig 210mp for the first welds with settings of 19 volts and 310 inches per minute of wire speed using .030" diameter er70s6 wire.
For welding accessories, visit my store https://weldmongerstore.com/
Видео Mig Welding Techniques Tested канала weldingtipsandtricks
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![How NOT TO Weld: Most Common MIG Welding Mistakes (Everlast PowerMTS)](https://i.ytimg.com/vi/Xod-ByrxHg4/default.jpg)
![Mig Welding Basics 2](https://i.ytimg.com/vi/AZbCTg8otRc/default.jpg)
![TIG Welding Aluminum Fabrication - Sheet Metal Forming - Round Hole to Rectangle Hole Transition](https://i.ytimg.com/vi/DnyrA2x6MTU/default.jpg)
![Multi Welder - PARKSIDE PMSG 200 A1 (199€) TIG, MIG, MMA | Unboxing and Test](https://i.ytimg.com/vi/UKvnQEKqBXM/default.jpg)
![Miller Multimatic 220 AC/DC Mig Welding Techniques](https://i.ytimg.com/vi/bdDVGX6XqNs/default.jpg)
![1G PLATE | MIG Root FLUX CORE Fill & Cap](https://i.ytimg.com/vi/xEKRCh5gvd8/default.jpg)
![MIG Pipe Welding Twin 6"Tee (REAL WORLD WELDING)](https://i.ytimg.com/vi/BD5v5P0aq10/default.jpg)
![Welding Workers Who Are Professional and Experts Of High Level ▶3](https://i.ytimg.com/vi/YoHcNXVy0to/default.jpg)
![Tig welding Walking The Cup pipe welding (2 1/2inch sch80 carbon steel pipe)](https://i.ytimg.com/vi/8rHfqykhX3o/default.jpg)
![Welding Workers Who Are Professional and Experts Of High Level](https://i.ytimg.com/vi/ywzib5Ocyn0/default.jpg)
![Proceso MIG MAG - Prueba en la posición de soldadura 3G](https://i.ytimg.com/vi/UZ3f3QW-NPc/default.jpg)
![🔥 Walking the Cup with MIG: Downhill Root, Uphill Fill and Cap | MIG Monday](https://i.ytimg.com/vi/DINFIOkJuS0/default.jpg)
![HOW TO MIG LIKE TIG WELD (Stacking Dimes) W/ OVERKILLRACINGANDCHASSIS w/ *Tips and Techniques*](https://i.ytimg.com/vi/VCaG5N39mU0/default.jpg)
![Mig Welding - Square Tubing](https://i.ytimg.com/vi/8NUFYGE4Lug/default.jpg)
![GMAW-S 3G Test Plate](https://i.ytimg.com/vi/2ELkhLI_W4U/default.jpg)
![How To MIG Weld with Settings](https://i.ytimg.com/vi/nDWGRzfcmcw/default.jpg)
![MIG Welding Overhead - Mig basics part 8](https://i.ytimg.com/vi/uvjZNTqi_aU/default.jpg)
![Vertical and Overhead Welding with a MIG Welder](https://i.ytimg.com/vi/XeQ2P-F35Is/default.jpg)
![How Much Money Should I Charge for My Welds?](https://i.ytimg.com/vi/XbdW8DeP_20/default.jpg)
![MIG Welder Settings: MIG Welding Basics for Beginners](https://i.ytimg.com/vi/d_tBi14DCcA/default.jpg)