Ignition

Hi, this is how i put fire in the gravity pellet feed burner. First, heat up the exhaust pipe to induce the flow of air from the burner to the outside of the garage. Step 2.. put the grate into the burner. Step 3, let the pellets free fall on the grate and adjust the grate to the start position.. about 1 cm from the closed position. Step 4. get a piece of fire starter under the grate and light it up. You can see how i made everything at www instructables . com ... look for "rocket stove mass heater and gravity fed pellet burner" Cheers!

Видео Ignition канала Bert Chart