6011 Vs 6013 BEST POLARITY for WELDING SHEET METAL

6011 Vs 6013 Which ROD and Polarity is BEST for WELDING SHEET METAL? Have you ever wondered what the difference is between 6011 and 6013 electrodes and what happens if you switch from DC Positive DCEP to DC Negative? DCEN Here is a side by side comparison of how each of these rods performs on sheet metal doing exactly that! See the results for yourself! The test material we used is 16 gauge (1.29 mm) sheet metal and the rods are 1/16" (1.6 mm) 6011 and 6013. The manufacturer recommended running these rods at 20-40 amps. I found that 20 amps was the sweet spot on my machine.

⇨ SUBSCRIBE to Brandon Lund DIY Builds: https://www.youtube.com/brandonlund

THE TOOLS & GEAR I USE
🔴 https://www.amazon.com/shop/brandonlund

Welder:
https://amzn.to/2t4rOZF

Chipping Hammer:
https://amzn.to/2sW4JIy

Welding Helmet:
https://amzn.to/2JGmGFa

Any commission earned from the above Amazon affiliate links all go towards helping to support the channel.

FOLLOW ME (for behind the scenes stuff)!
⇨ Instagram: https://www.instagram.com/lunddiybuilds
⇨ Facebook: https://www.facebook.com/LundDIYBuilds
⇨ Twitter: https://twitter.com/LundDIYBuilds

For Business Inquiries: LundDIYBuilds@gmail.com

Disclaimer: These videos are intended for entertainment purposes only and as such, you should not attempt to do any of the things you see me doing. Always read and follow the manufacturer’s safety guidelines before handling tools. Seek professional advice and training before using any welding equipment. Never operate any tool without wearing the proper personal protective equipment. Final warning, Do not attempt to do any of the things you see me doing!

Видео 6011 Vs 6013 BEST POLARITY for WELDING SHEET METAL канала Brandon Lund