Nine9 front and back Chamfer mill
For front and back chamfering. Eliminates 2nd operation or deburring time.
High performance chamfer tool for upgrading your machining process.
● Smallest counter sink diameter Ø0.276".
● 4 times faster and up to 10 times higher feed rate than competitors.
Suitable for almost all kind of steel, stainless steel and casting iron, aluminum, non ferrous metal and hardened steel up to 56HRC.
Видео Nine9 front and back Chamfer mill канала Everede Tool Company
High performance chamfer tool for upgrading your machining process.
● Smallest counter sink diameter Ø0.276".
● 4 times faster and up to 10 times higher feed rate than competitors.
Suitable for almost all kind of steel, stainless steel and casting iron, aluminum, non ferrous metal and hardened steel up to 56HRC.
Видео Nine9 front and back Chamfer mill канала Everede Tool Company
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
One Nine9 NC Helix Drill performs multiple patternsNine9 Ergo Integrated ER Taper-shank CutterDeep hole drill dia 40 x 390mm on pulley by Nine9 10D indexable drillNine9 Indexable Engraving ToolPresentation of Nine9 ER collet insert type cutter for swiss type lathesNine9 radius 0.02 to 0.236 inch indexable corner rounding cutterRadius 0.5 to 10mm Corner Rounding _Nine9 cutting toolsDuemmel MiniCutIMTS 2018 Booth Tour Nine9 NC Helix Drill and i Center are promoted by Everede Tool CoHow to solve your chip problem? NC Helix Drill can evacuate the chip easily.Duemmel UltraMiniOne NC Helix Drill to cut SAE8620, SUS304, AL6061T6, TiAl6V4 and Inconel 718Nine9 X060 micro spot drills can improve straightness or tool life of a micro drill on round barERgo dia. 0.0394 inch to 0.9890 inch ER taper shank boring toolsNine9 5D Indexable drills with better straightness roundnessNine-9 Cutting Tools and ToolholdersC 0.2 Chamfering by Nine9 chamfer millSee how NC Helix Drill help Jones solving various drilling problemsNine9 Ergo cutter system apply for Swiss machining, tapping center and standard ER16 collet chuckNine9 i-Center_indexable center drill