MOST GAS ENGINEERS CAN'T GET THESE TEN QUESTIONS CORRECT without looking in their training manuals.
Derek gives us another ten gas questions to see if gas engineers can get them correct without looking in their training manuals, books or the internet.
if you are a trainee have a go and see if you can beat the proffessionals and get 10 out of 10
The answers to TEN GAS QUESTIONS MOST GAS ENGINEERS DON'T KNOW without using their training manuals.
https://youtu.be/pIzLhPcPJXg
Видео MOST GAS ENGINEERS CAN'T GET THESE TEN QUESTIONS CORRECT without looking in their training manuals. канала Tomkat Gas Training
if you are a trainee have a go and see if you can beat the proffessionals and get 10 out of 10
The answers to TEN GAS QUESTIONS MOST GAS ENGINEERS DON'T KNOW without using their training manuals.
https://youtu.be/pIzLhPcPJXg
Видео MOST GAS ENGINEERS CAN'T GET THESE TEN QUESTIONS CORRECT without looking in their training manuals. канала Tomkat Gas Training
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
The answers to TEN GAS QUESTIONS MOST GAS ENGINEERS DON'T KNOW without using their training manuals.
OPEN FLUE SYSTEM acs revision in less than 10 minutes on open flue boilers and fires flue system.
Important news for gas engineers and landlords, changes to regulations in 2022, Grundfos go replace
10 Signs You’re Way More Intelligent Than You Realize
TEN GAS QUESTIONS EVERY GAS ENGINEER SHOULD KNOW, THE ANSWERS
GAS SAFETY CONTROLS part 4 looking at zero gas valves, thermistors, and gas meter controls.
How to use a flue gas analyser and understand the results PART 1
Tightness testing a natural gas supply, ACS REVISION IN LESS THAN TEN MINUTES (hopefully) part 1.
TEST YOUR GAS KNOWLEDGE with 6 question at 6pm twice weekly during the lockdown
What to expect during your ACS
10 Lessons in Life People Learn TOO LATE
I GOT TROLLED BY A TRAINER, is it time for me to leave YouTube gas cooker controls/ safety devices
ID, AR, NCS THE IGEM :G: 11 QUIZ. gas unsafe situations procedure what gas engineers need to know.
How to put different boilers into service mode chimney sweep mode or high and low fire for analysing
Purging natural gas supply, ACS REVISION IN LESS THAN 10 MINUTES (hopefully) part 2 purging 0.01 m3
10 GAS QUESTIONS EVERY GAS ENGINEER SHOULD KNOW without using the books, training aids or internet.
EXPANSION VESSELS, sizing, installing and how they work. all trainees need to know about ex vessels.
TEST YOUR GAS KNOWLEDGE 6 the final part check your answers from part 5 and try these 6 more