Old Saw Blade + Sandpaper = Perfect Smooth Straight Edges - Making a Precision Edge Sander
I used an old worn out, rusty saw blade to make the sanding disk. Cutting off the teeth is the first step and I did that with an angle grinder equipped with a thin cutting blade. A hacksaw would get it done, but take longer and require just a bit more effort.
The sandpaper is a standard 9 x 11 sheet and is glued onto the 9" diameter disk with spray adhesive. I did this before (on that blade in the opening scene) and the spray adhesive does a great job of firmly holding the sandpaper on.
I only put sandpaper on one side, but you can do both and have a fresh surface ready to go when the first wears out. Or you can put a finer grit (or coarser) on the other side.
This produces very good results with 100 grit paper. It does still have swirls marks but they are very tiny and light hand sanding would quickly clean that up.
Where this really shines is with plywood, as you can see in the before / after photos in the video. My table saw with a sharp blade produces a very good cut, but that can be dramatically improved with this.
It also does a great job of jointing a straight edge on a board. It takes a few passes but it will get it done and it'll a silky smooth finish as well.
This setup lets you quickly edge sand stock of any width and up to as thick as the disk is sticking up, and is as fast a changing the blade on your saw.
In the video I cut high into the quick release auxiliary fence to make it look more dramatic, but I would recommend only going a bit higher than the stock you normally work with. This will give more support on either side of the blade for sanding shorter pieces. You can also wheel the disk all the way up without the fence and use it as a normal disk sander to shape parts.
▶️ Project plans for sale: https://ibuildit.ca/plans/
▶️Support the work I do on Locals:
https://ibuildit.locals.com/
▶️ Patreon:
https://www.patreon.com/user?u=865843&ty=h
▶️ Join my Makers Mob for detailed build tutorials:
https://go.themakersmob.com/john-heisz-i-build-it/?via=ibuildit
My "Scrap bin" channel:
https://www.youtube.com/c/IBuildItScrapBin
#ibuildit
#woodworking
Website: https://ibuildit.ca/
Facebook: https://www.facebook.com/I-Build-It-258048014240900/
Instagram: https://www.instagram.com/i_build_it.ca/
Видео Old Saw Blade + Sandpaper = Perfect Smooth Straight Edges - Making a Precision Edge Sander канала John Heisz - I Build It
The sandpaper is a standard 9 x 11 sheet and is glued onto the 9" diameter disk with spray adhesive. I did this before (on that blade in the opening scene) and the spray adhesive does a great job of firmly holding the sandpaper on.
I only put sandpaper on one side, but you can do both and have a fresh surface ready to go when the first wears out. Or you can put a finer grit (or coarser) on the other side.
This produces very good results with 100 grit paper. It does still have swirls marks but they are very tiny and light hand sanding would quickly clean that up.
Where this really shines is with plywood, as you can see in the before / after photos in the video. My table saw with a sharp blade produces a very good cut, but that can be dramatically improved with this.
It also does a great job of jointing a straight edge on a board. It takes a few passes but it will get it done and it'll a silky smooth finish as well.
This setup lets you quickly edge sand stock of any width and up to as thick as the disk is sticking up, and is as fast a changing the blade on your saw.
In the video I cut high into the quick release auxiliary fence to make it look more dramatic, but I would recommend only going a bit higher than the stock you normally work with. This will give more support on either side of the blade for sanding shorter pieces. You can also wheel the disk all the way up without the fence and use it as a normal disk sander to shape parts.
▶️ Project plans for sale: https://ibuildit.ca/plans/
▶️Support the work I do on Locals:
https://ibuildit.locals.com/
▶️ Patreon:
https://www.patreon.com/user?u=865843&ty=h
▶️ Join my Makers Mob for detailed build tutorials:
https://go.themakersmob.com/john-heisz-i-build-it/?via=ibuildit
My "Scrap bin" channel:
https://www.youtube.com/c/IBuildItScrapBin
#ibuildit
#woodworking
Website: https://ibuildit.ca/
Facebook: https://www.facebook.com/I-Build-It-258048014240900/
Instagram: https://www.instagram.com/i_build_it.ca/
Видео Old Saw Blade + Sandpaper = Perfect Smooth Straight Edges - Making a Precision Edge Sander канала John Heisz - I Build It
Показать
Комментарии отсутствуют
Информация о видео
29 сентября 2021 г. 17:58:15
00:07:05
Другие видео канала
![Saw blade manufacturers won't want you to see this tool
#sawblades #tools](https://i.ytimg.com/vi/qWU9XirKYiI/default.jpg)
![Can you Cut and Sand at the Same Time? Interesting Results...](https://i.ytimg.com/vi/TkqT-P9pxek/default.jpg)
![Why Didn't I Think Of This Before? Genius Idea But Will it Work?](https://i.ytimg.com/vi/7-g2RwFEjIk/default.jpg)
![DIY 20-inch Disc Sander Build. $2000 Tool, Cheap and Easy.](https://i.ytimg.com/vi/5RwIRv01ygs/default.jpg)
![Disc Sander DIY (12inch/300mm) / disc sander build](https://i.ytimg.com/vi/MNC4SUCrYFs/default.jpg)
![Perfect Edges Jointer on the Table Saw - Easy To Make!](https://i.ytimg.com/vi/ZB11IbFjtFs/default.jpg)
![](https://i.ytimg.com/vi/KTChDeEwgFM/default.jpg)
![Genius Idea? Making Push Button Pop Up Bench Dogs](https://i.ytimg.com/vi/_T3GoD4ptsw/default.jpg)
![Genius Idea for Making Small Drawers or Beyond Stupid? You Tell Me](https://i.ytimg.com/vi/xdCSSa4UOwA/default.jpg)
![Making A Portable Drill Press / Drilling Guide](https://i.ytimg.com/vi/eAgj-nLZ5uI/default.jpg)
![I Like Money, But This is Better](https://i.ytimg.com/vi/9w0640basGY/default.jpg)
![This sanding disc will improve your woodworking and carpentry, period.](https://i.ytimg.com/vi/b-kXTKVVTL4/default.jpg)
![Making The Coolest Small Parts Organizer - Woodworking](https://i.ytimg.com/vi/NfsZJSWTV8c/default.jpg)
![How To Make A Self-Clamping Straightedge Guide](https://i.ytimg.com/vi/00T-qFgnsKw/default.jpg)
![The Only 3 Sandpapers You Really Need | SANDING BASICS](https://i.ytimg.com/vi/mKairfMzc6Q/default.jpg)
![The Workbench || Traditional Joinery Bench](https://i.ytimg.com/vi/Rx5GDTnaegQ/default.jpg)
![SMALL Cross-Cut Sled with ADJUSTABLE Fence, EXTENSION wing and BEVEL Feature!](https://i.ytimg.com/vi/McXJxYLXq-E/default.jpg)
![Sharpening A Table Saw Blade on the Table Saw](https://i.ytimg.com/vi/zHtVT-phN5I/default.jpg)
![Assembly table - Best gluing jig ever!](https://i.ytimg.com/vi/1ujUF5skCzI/default.jpg)
![Make These Clamps And Save Hundreds of Dollars - Woodworking](https://i.ytimg.com/vi/Q5WoUrT91jM/default.jpg)