How to Clean your Printer's Spigots

CLICK HERE: http://www.marrutt.com/printing-accessories/printer-maintenance.html
If your nozzle check is missing in different places each time, it is likely that air is entering your ink circuit somewhere, and the most likely cause is A: leaky cartridge (replace cartridge) and if that does not work, try B: Cleaning your Print Head Spigots. These are the little black plastic 'pins' which pierce your inkjet cartridges. They have serations at the top of the pins, which enable the print head to draw ink out of your cartridges, and the cartridges have a rubber gland, which is supposed to form an air-tight seal with the printer spigots [pins). If you have a tiny area of dried ink stuck on the side of the spigots, you can have microscopic grains of dried ink, which will allow air to be drawn into the print head, and you will be trying to print with ink/air mixed, which is foam! You will need Cotton Buds, Magic Bullet Maintenance Fluid.
CLICK HERE: http://www.marrutt.com/printing-accessories/printer-maintenance.html for further information

Видео How to Clean your Printer's Spigots канала marrutt