Change the TXPower of your Wifi Adapter - Part 2

This is the 2nd Part,, and thus second method, for changing the TXpower of your Wifi Adapter. This method will stick on reboot, in regards to your Regulatory DB, however you may still need to manually change the TXPower of your adapter each restart (The commands are shown in the video)

Links Used:
git://git.kernel.org/pub/scm/linux/kernel/git/sforshee/wireless-regdb.git

If this method does not work for you, then your wifi adapter is no doubt hardcoded to a set value, within its firmware, and cannot be changed.

NOTE: I work with dB, and have gotten the mW values in comparison, wrong, concerning some values (the dB are all correct stil). The correct mW values are below.

mW to dBm conversion table
Power (mW) Power (dBm)

1 mW 0 dBm
2 mW 3.0103 dBm
3 mW 4.7712 dBm
4 mW 6.0206 dBm
5 mW 6.9897 dBm
6 mW 7.7815 dBm
7 mW 8.4510 dBm
8 mW 9.0309 dBm
9 mW 9.5424 dBm
10 mW 10 dBm
100 mW 20 dBm
1000 mW 30 dBm
2000 mW 33.3 dBm
10000 mW 40 dBm
100000 mW 50 dBm
1000000 mW 60 dBm
10000000 mW 70 dBm
100000000 mW 80 dBm
1000000000 mW 90 dBm
10000000000 mW 100 dBm

Disclaimer: These tutorials are for informative purposes only, I do not condone, or encourage, any illegal activity.

Thank you.

Видео Change the TXPower of your Wifi Adapter - Part 2 канала PenSec Tutorials