Ducati 848 Engine Strip - Head Rebuild and setting Valve Clearances
Hi Everyone, second part of the Ducati 848 engine heads rebuild, in this video I will be doing the following work:
Re-assemble the valve train
- Insert the closing rockers
- Insert the valves
- Install the datum closing and opening shims
- Install the opening rockers
- Check the datum valve clearances
- assess the changes needed to the clearances
- measure the shims and change out for correct sizes
- re-assemble the head with correct valve clearances
- Install the new cam cover gaskets and install
- install the rocker pin gallery blanking plugs
All of this work is on the horizontal head, the vertical will be completed off camera.
Between the last video and this one I have cleaned the head, combustion chamber and ports, finally installed new valve guide oil seals.
The next video will see the bottom end re-assembled
Please like, share, comment and subscribe
#ucati848 #cyclinderheadrebuild #ducativalveclearances
Видео Ducati 848 Engine Strip - Head Rebuild and setting Valve Clearances канала DesmoWerx
Re-assemble the valve train
- Insert the closing rockers
- Insert the valves
- Install the datum closing and opening shims
- Install the opening rockers
- Check the datum valve clearances
- assess the changes needed to the clearances
- measure the shims and change out for correct sizes
- re-assemble the head with correct valve clearances
- Install the new cam cover gaskets and install
- install the rocker pin gallery blanking plugs
All of this work is on the horizontal head, the vertical will be completed off camera.
Between the last video and this one I have cleaned the head, combustion chamber and ports, finally installed new valve guide oil seals.
The next video will see the bottom end re-assembled
Please like, share, comment and subscribe
#ucati848 #cyclinderheadrebuild #ducativalveclearances
Видео Ducati 848 Engine Strip - Head Rebuild and setting Valve Clearances канала DesmoWerx
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![848 Engine Strip - Fitting Ducati 848 Timing Belts - Same process for 1098](https://i.ytimg.com/vi/QHIlUZpwVhc/default.jpg)
![Ducati 848 Engine Strip - Transmission repair](https://i.ytimg.com/vi/-PSB1Ld_6JY/default.jpg)
![Why checking Valve Clearance is VERY IMPORTANT !!!!](https://i.ytimg.com/vi/XIMcUF6SeQg/default.jpg)
![Thunderbike Race Prep Video 4 - Ducati 748 setting valve clearances](https://i.ytimg.com/vi/Xrh2hScFpUU/default.jpg)
![Projects - Sale Prep Honda RS250 and Mini R53 race car build (Bike racer to Car racer)](https://i.ytimg.com/vi/e4QcEdEPS64/default.jpg)
![Ducati 848 Seized Engine strip - Checking for damage](https://i.ytimg.com/vi/k5f9rhcW008/default.jpg)
![Timelapse Motorbike - Ducati XDiavel engine out and strip down part one](https://i.ytimg.com/vi/faD8tVVCxmg/default.jpg)
![DesmoWerx Channel Update October 2021- Bikes, Builds, Delays, Colab and additional content](https://i.ytimg.com/vi/07WpgySfPJA/default.jpg)
![How To Check And Adjust Screw-Type Valve Clearances | MC Garage](https://i.ytimg.com/vi/EhHiOO96Kc8/default.jpg)
![Ducati 1098S Service - Changing the Oil & Dust seals and replacing oil on Ohlins forks model FG5110](https://i.ytimg.com/vi/xTKjI161uJc/default.jpg)
![Ducati ST2 Restoration Project - Video 10 Showa Fork Seal's and Bush replacement service](https://i.ytimg.com/vi/8-z5srgEMOU/default.jpg)
![Testastretta 749 Engine Build No.2 - Cylinder studs and head build](https://i.ytimg.com/vi/Zig6SNOPVtA/default.jpg)
![TRANSPARENT CYLINDER HEAD SIMSON TUNING CLEAR ENGINE POLSKA](https://i.ytimg.com/vi/2d-XmTSWw2A/default.jpg)
![DUCATI 4V Head Porting](https://i.ytimg.com/vi/k_OfxvTkpI4/default.jpg)
![Ducati 848 Engine Strip / Teardown - Vertical Head Damage](https://i.ytimg.com/vi/M1rbGoDKx4A/default.jpg)
![Ducati 748S Engine Refresh Part 1- Prior poor workmanship found within!!!](https://i.ytimg.com/vi/g38JgvvC41s/default.jpg)
![Ducati 7mm closing valve shims](https://i.ytimg.com/vi/FblP9kHdqqI/default.jpg)
![Ducati Panigale 1199 Engine Rebuild](https://i.ytimg.com/vi/mWTpY6h6eco/default.jpg)
![DesmoWerx Tech Guide 3 - Tools for a Ducati Desmoquattro Engine build.](https://i.ytimg.com/vi/mv1Nav6fcXo/default.jpg)
![How To Adjust the Valves on a KTM RC390 and Other Motorcycles | MC GARAGE](https://i.ytimg.com/vi/sScXWEoSqyM/default.jpg)