6 inch printed datarack with home comms #raspberrypi #3dprinting #lorawan
This is a DIY 3D printed 6inch rack for my home communications with 5 units.
Module 1 : A Heltec V3 Lora with RNode Firmware
Module 2 : A Heltec V3 Lora Meshtastic Firmware
Module 3 : Raspberry Pi 2 model B with RTL-SDR dongle. Configured as a Flightradar ADS-B tracker
Module 4: ATS-20+ Shortwave radio
Module 5: GAN USB Charger station.
#3dprinting #homemade #serverrack #bambulab #adsb #flighttracker
Видео 6 inch printed datarack with home comms #raspberrypi #3dprinting #lorawan канала EpicTechAndToolz
Module 1 : A Heltec V3 Lora with RNode Firmware
Module 2 : A Heltec V3 Lora Meshtastic Firmware
Module 3 : Raspberry Pi 2 model B with RTL-SDR dongle. Configured as a Flightradar ADS-B tracker
Module 4: ATS-20+ Shortwave radio
Module 5: GAN USB Charger station.
#3dprinting #homemade #serverrack #bambulab #adsb #flighttracker
Видео 6 inch printed datarack with home comms #raspberrypi #3dprinting #lorawan канала EpicTechAndToolz
Комментарии отсутствуют
Информация о видео
10 мая 2025 г. 20:26:59
00:00:24
Другие видео канала
