How to COMPLETELY Restore a Lexus Sc300 Rear Subframe/Undercarriage in 30 minutes
It's finally done...600+ individual clips with over 1000 cuts, I have here the ENTIRE process from start to finish of my Sc300’s rear subframe restoration!
This was done completely impromptu in terms of order of operations.
I know there could’ve been easier or more efficient ways to do things, but this is how it went doing it my way...
Here are some time stamps for those who can’t afford to watch the whole video in one go:
1:25 Subframe Drop
7:49 OEM Bushing Removal
10:36 Intermission/Cerakote New ALL parts
12:28 Complete E-Brake Assembly
14:31 Poly Bushings Install/Start of Reassembly
18:38 Axles and Arms Installation
21:49 Torquing Stuff Down
24:19 Raising Subframe into Car
Here’s the complete list of every part, tool, and consumable used in the process just like the manual swap video:
Parts
Strongflex Differential and Rear Subframe Bushings Set
Megan Rear Lower Control, Toe, Traction Arm Set
BV Outer Tie Rods
Whiteline Sway Bar Set
BV Rear Uca's
NSK Rear Wheel Bearing and Hubs
Os Giken Lsd 1.5 Way Driftmotion
BV Rear Endlinks
Acdelco E-Brake Shoes Rockauto
Superpro Rear Knuckle Bushings
Brand New OEM Hardware
48780B #1 - x2 traction bolt
48780B #2 - x2 smaller traction bolt
48780C #1 - x2 traction nut
48780C #2 - x2 smaller traction nut
90201-14020 - x6 arms washers
48194A #2 - x2 camber arm bolt
48198R - x4 toe/camber plate
48710N - x4 toe/camber nut
48770C - x4 rear upper bolts
90201-14031 - x4 rear upper washer
48770D - x4 rear upper nuts
48770F - x4 rear upper other locking
90105-14082 - x2 coil over bolt
90170-14006 - x2 coil over nut
94621-11400 - x2 coil over washer
48194A #1 - x2 toe arm bolt
48757 -x4
52285 x2
90110-14007 x3
90179-16023 x2
90119-10679 x8
Tools/Consumables
Ball joint separator
3 ton jaw puller
Hammer/Mallets
Blow torch
Pb blaster
Super clean degreaser
Brake cleaner
High temp grease
Anti seize
Red loctite
Labor Done Not By Me
Os Giken Install/Seal Refresh
Wheel bearing/hub press
Cerakote ceramic coat for knuckles, subframe, etc
Since this project, everything interior and exterior wise has been replaced/restored on my Sc300 besides the front dash.
All supporting mods for turbo are now complete and motor is the only thing remaining! Hopefully by the end of this year...
IG: 2jway
Видео How to COMPLETELY Restore a Lexus Sc300 Rear Subframe/Undercarriage in 30 minutes канала 2jway
This was done completely impromptu in terms of order of operations.
I know there could’ve been easier or more efficient ways to do things, but this is how it went doing it my way...
Here are some time stamps for those who can’t afford to watch the whole video in one go:
1:25 Subframe Drop
7:49 OEM Bushing Removal
10:36 Intermission/Cerakote New ALL parts
12:28 Complete E-Brake Assembly
14:31 Poly Bushings Install/Start of Reassembly
18:38 Axles and Arms Installation
21:49 Torquing Stuff Down
24:19 Raising Subframe into Car
Here’s the complete list of every part, tool, and consumable used in the process just like the manual swap video:
Parts
Strongflex Differential and Rear Subframe Bushings Set
Megan Rear Lower Control, Toe, Traction Arm Set
BV Outer Tie Rods
Whiteline Sway Bar Set
BV Rear Uca's
NSK Rear Wheel Bearing and Hubs
Os Giken Lsd 1.5 Way Driftmotion
BV Rear Endlinks
Acdelco E-Brake Shoes Rockauto
Superpro Rear Knuckle Bushings
Brand New OEM Hardware
48780B #1 - x2 traction bolt
48780B #2 - x2 smaller traction bolt
48780C #1 - x2 traction nut
48780C #2 - x2 smaller traction nut
90201-14020 - x6 arms washers
48194A #2 - x2 camber arm bolt
48198R - x4 toe/camber plate
48710N - x4 toe/camber nut
48770C - x4 rear upper bolts
90201-14031 - x4 rear upper washer
48770D - x4 rear upper nuts
48770F - x4 rear upper other locking
90105-14082 - x2 coil over bolt
90170-14006 - x2 coil over nut
94621-11400 - x2 coil over washer
48194A #1 - x2 toe arm bolt
48757 -x4
52285 x2
90110-14007 x3
90179-16023 x2
90119-10679 x8
Tools/Consumables
Ball joint separator
3 ton jaw puller
Hammer/Mallets
Blow torch
Pb blaster
Super clean degreaser
Brake cleaner
High temp grease
Anti seize
Red loctite
Labor Done Not By Me
Os Giken Install/Seal Refresh
Wheel bearing/hub press
Cerakote ceramic coat for knuckles, subframe, etc
Since this project, everything interior and exterior wise has been replaced/restored on my Sc300 besides the front dash.
All supporting mods for turbo are now complete and motor is the only thing remaining! Hopefully by the end of this year...
IG: 2jway
Видео How to COMPLETELY Restore a Lexus Sc300 Rear Subframe/Undercarriage in 30 minutes канала 2jway
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![5 Manual transmissions you can swap in your Lexus SC400/SC300](https://i.ytimg.com/vi/MuntBgG-V5s/default.jpg)
![I Build My First NAT: SC300 Ep6](https://i.ytimg.com/vi/5OWqkqCatFo/default.jpg)
![Mkiv Supra/Sc 300/400 rear wheel bearing DIY](https://i.ytimg.com/vi/I_bW0MVBhdM/default.jpg)
![Rear Subframe Removal and Installation | Lexus IS300 GS300 IS200 Altezza](https://i.ytimg.com/vi/0Xi3tXBpK4I/default.jpg)
![How to Install a COMPLETELY New Front Suspension in your Car or Truck](https://i.ytimg.com/vi/V_g1-WHD4rw/default.jpg)
![Buying The CLEANEST Lexus SC300 In The Country Was A NIGHTMARE (Tavarish LOSES IT)](https://i.ytimg.com/vi/hAsGZA7XiTE/default.jpg)
![WTF2J Supra Ep 8: INSTALL GUIDE - Hardrace Control Arms, Camber, Caster, Toe, Tie Rods](https://i.ytimg.com/vi/mzAhmQOILJY/default.jpg)
![Looking inside an engine during cold start (-30 degrees)](https://i.ytimg.com/vi/fNzSQxd4mzU/default.jpg)
![BMW E46 M3 Rear Subframe Refresh DIY (Trailing Arm Bushings, Camber Arms, Differential Mounts)](https://i.ytimg.com/vi/mKNPI5KTUK8/default.jpg)
![Adding Oil On The Back Side Of Bearings During Engine Assembly. Good Or Bad?](https://i.ytimg.com/vi/yAt-fkTntjE/default.jpg)
![How to make your car handle like new! StrongFlex Front Suspension Bushing Kit Install Lexus IS300](https://i.ytimg.com/vi/CnZS4JVpB0w/default.jpg)
![Toyota Soarer owner loses his mind and restores/replaces entire undercarriage](https://i.ytimg.com/vi/rwSzAoMYGfw/default.jpg)
![SC300 Solid Differential bushing install (The Easy way)](https://i.ytimg.com/vi/5GpIL_DrUHc/default.jpg)
![Rear Subframe Removal - LS400 VIP Build #4](https://i.ytimg.com/vi/PtbwjMOQUjg/default.jpg)
![SC300 Wiring Harness Relocation](https://i.ytimg.com/vi/mn2LOgq1B0Y/default.jpg)
![1994 Lexus Sc300 97 Kit Transformation](https://i.ytimg.com/vi/mPMatypBaQw/default.jpg)
![Spice up your Lexus GS for under 100$ !!! GS430 Diff Swap !](https://i.ytimg.com/vi/mxdrS84yqs0/default.jpg)
![Complete Rear Subframe Overhaul! Lexus IS300 IS200 Altezza](https://i.ytimg.com/vi/y7tO07GhlUM/default.jpg)
![Lexus IS300: How to replace the rear wheel bearing](https://i.ytimg.com/vi/SXvssI4wwuA/default.jpg)
![Drift Car Build: SC300 Ep2](https://i.ytimg.com/vi/p3u4vVnkdno/default.jpg)