Secure Set: Setting Communication Towers, Antennas & Small Wind Turbines — Installation & Testing
In this multi-segment video, we test Secure Set as an alternative material to concrete for a base for direct-embedded, non-guyed communication towers, towers typically used for antennas, small wind turbines and other purposes.
In the first segment, we compare the process of tower installation via the traditional concrete method versus with Secure Set.
In the second segment, we test the 65-ft tall tower set with a Secure Set foundation to the ANSI TIA222G standard (which specifies a direct buried, non-guyed, cantilever 65-ft tower, when subjected to a 60-mph wind and coated with a half-inch of ice, would have a 4-degree lean at the tip of the tower away from the base of the tower without the base being compromised).
As a final test, we see how much load it would take to pull the Secure Set out of the ground. We hope you enjoy the video!
Find out more about Secure Set and it's many uses at https://www.secureset.net.
Видео Secure Set: Setting Communication Towers, Antennas & Small Wind Turbines — Installation & Testing канала Secure Set
In the first segment, we compare the process of tower installation via the traditional concrete method versus with Secure Set.
In the second segment, we test the 65-ft tall tower set with a Secure Set foundation to the ANSI TIA222G standard (which specifies a direct buried, non-guyed, cantilever 65-ft tower, when subjected to a 60-mph wind and coated with a half-inch of ice, would have a 4-degree lean at the tip of the tower away from the base of the tower without the base being compromised).
As a final test, we see how much load it would take to pull the Secure Set out of the ground. We hope you enjoy the video!
Find out more about Secure Set and it's many uses at https://www.secureset.net.
Видео Secure Set: Setting Communication Towers, Antennas & Small Wind Turbines — Installation & Testing канала Secure Set
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Building a Ham radio tower concrete footing 20,000 pound counter weight](https://i.ytimg.com/vi/nSzNY3cCQF8/default.jpg)
![Installing the Heights CU84 Tower](https://i.ytimg.com/vi/aKhM02_6Cks/default.jpg)
![DIY Ham radio antenna tower hinge plate installation 12-19-18](https://i.ytimg.com/vi/XXXt_SvLBPg/default.jpg)
![Amateur (Ham) Radio Tower Install Tips](https://i.ytimg.com/vi/NukngERefqI/default.jpg)
![100 ft Tilting Tower](https://i.ytimg.com/vi/eXskgubgrss/default.jpg)
![The Tall Tower (2012) #TBT](https://i.ytimg.com/vi/9fO8f_Qu3ls/default.jpg)
![GRA Services— Introducing Secure Set Spray Foam for easy post setting](https://i.ytimg.com/vi/bLxNslrGB-w/default.jpg)
![Tilt-Over Crank-Up Antenna Mast](https://i.ytimg.com/vi/mynik3R4ySU/default.jpg)
![How to Fill Voids Under Concrete Slabs with Secure Set Spray Foam](https://i.ytimg.com/vi/iigbr-tIM9I/default.jpg)
![Innovative Tilt-up Wireless Internet Tower](https://i.ytimg.com/vi/Dw_Kx5uaUto/default.jpg)
![Secure Set Used for Radio Tower Foundation](https://i.ytimg.com/vi/mzeroltfEdg/default.jpg)
![How Cell Towers Work: Hands-On!](https://i.ytimg.com/vi/Ct0wFde9XcI/default.jpg)
![How to Install Ham Radio Tilting Crank Up Tower](https://i.ytimg.com/vi/6LwXpyhieLw/default.jpg)
![The Building & Erecting of Ham Radio Tower - Station K2PTL](https://i.ytimg.com/vi/d6BNjM45LAw/default.jpg)
![Amateur Radio Station KJ4BJ Tower Install #2](https://i.ytimg.com/vi/WKme19dwyIs/default.jpg)
![DMXMD-32N Tower Installation - Wade Antenna](https://i.ytimg.com/vi/KrB_UAugTK4/default.jpg)
![Rohn tower](https://i.ytimg.com/vi/-asXReKlx2I/default.jpg)
![Communication Towers](https://i.ytimg.com/vi/hAcP3quPUho/default.jpg)
![Antenna Mast Installation](https://i.ytimg.com/vi/LfJVGah7d4k/default.jpg)
![Wade Antenna DMX Towers](https://i.ytimg.com/vi/KuQ6zmzjYSA/default.jpg)