Boring Mill Alignment Part 3..... The struggle continues!!!
More tail chasing trying to get every axis moving in the orientation it should. There is a lot to getting one of these machines setup properly. Follow along as I go thru more on measuring and checking the travels and alignments on the machine and I discuss the problem I have with the spindle alignment vs the table. Good news is I am pretty sure I found the right tailstock for the machine so adding that to the aresonal will be invaluable in the future for line boring.
Видео Boring Mill Alignment Part 3..... The struggle continues!!! канала bcbloc02
Видео Boring Mill Alignment Part 3..... The struggle continues!!! канала bcbloc02
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![First Gen Intercooled Dodge Cummins VE Dyno Proven 400rwhp and 1000ft-lbs tq Recipe for under $4k](https://i.ytimg.com/vi/8gWoWL-sZ6I/default.jpg)
![Cutting Cylinder Liners for Fire Rings](https://i.ytimg.com/vi/_ACwiiX_CSY/default.jpg)
![Proper Piston Snap Ring Installation Tips Also Racing Diesel Valve Relief Cutting](https://i.ytimg.com/vi/gBvrJOeoddw/default.jpg)
![This Old Barn/ Shop concrete prep.... Finally!!](https://i.ytimg.com/vi/T5V1oGQJUI0/default.jpg)
![Cummins Swap the Hyster Rc150 Forklift Part 17](https://i.ytimg.com/vi/4PD_Kv2eGXk/default.jpg)
![This Old Barn/Shop Concrete Pour #2](https://i.ytimg.com/vi/lgl_Dm9lIqg/default.jpg)
![October 2017 This Old Barn/Shop Update](https://i.ytimg.com/vi/MpnlvR0yBUw/default.jpg)
![Cylinder Head Assembly](https://i.ytimg.com/vi/PlIFru8IIpo/default.jpg)
![I Bought a Semi Truck Chassis Dynamometer ! Taylor CM-51 1100 continuous hp @ 80-90Mph](https://i.ytimg.com/vi/cXEXx6dMUjc/default.jpg)
![This Old Barn/Shop first concrete!](https://i.ytimg.com/vi/XBgPkr1R1jE/default.jpg)
![How to Change Nozzles on 5.9 Cummins Injectors Setting Pop Pressure and Testing Power Driven 7x .011](https://i.ytimg.com/vi/OUjIf6VUtaA/default.jpg)
![Dodge Cummins First Gen A1 Head Studs and 7x.011 Injector Install Big Trailer Towing Power 400hp?](https://i.ytimg.com/vi/ijRbnqraaYA/default.jpg)
![Shop update and crane and drill repair donations as well as Patreon](https://i.ytimg.com/vi/mFvXDyXjLgg/default.jpg)
![Monarch Lathe Sight glass replacment and resealing.](https://i.ytimg.com/vi/MB-uO4UCnNs/default.jpg)
![Cummins Hyster Part12: Engine Fitting](https://i.ytimg.com/vi/dCA7jG86SQQ/default.jpg)
![May This Old Barn/Shop update and a visitor](https://i.ytimg.com/vi/VjMftst4yEc/default.jpg)
![Mid August this Old Barn/Shop update](https://i.ytimg.com/vi/a8_x_biNdiI/default.jpg)
![How I setup Parts with Damaged Features Align Boring Blind Hole Using Rotary Table](https://i.ytimg.com/vi/e52tX7hv0Kg/default.jpg)
![April 2019 This Old Barn/Shop Update](https://i.ytimg.com/vi/j37OqYno9hA/default.jpg)
![Huge chuck and Press + Road Trip!](https://i.ytimg.com/vi/rgBGHghkMQ8/default.jpg)
![Making a P-Pump fit on a Deere Block](https://i.ytimg.com/vi/VPWZN_j1a5U/default.jpg)