Buy a cultivator for $125 (mua một cái máy bán vé hạng 125 đô la )
#경운기싸게구입하는법 #경운기깨진엔진블럭수리 #스틸에폭시사용법
I bought a kisidong cultivator on Mars for $125.00
Repair engine block using steel epoxy.
Start motor contact has been repaired.
I'm just telling you how to make it easy for anyone to do it.
In the past, I used to throw away the engine block because I couldn't use it.
Five thousand won can be used to fix it, but there's no reason to over-maintain it in a 20 year old cultivator.
It could be a difference of opinion.
It's not a rare product, and there's no need to over-maintain the store.
I think it's best if we can use it normally by using epoxy.
The engine block is made of cast iron.
Cast iron welding is one of the tricky welding.
Ordinary consumers can't do it.
To make a cast iron welding, empty the engine oil.
It's better to run the engine sideways, but it's going to be tricky.
누구나 할수있는 쉬운방법을 여러분께 알려드린겁니다.
예전에는 이런경우 엔진블럭 못쓴다고 폐기를 했습니다.
수리비 오천원정도면 해결할수 있는데 20년이 지난 경운기에 과잉정비를 할 이유는 없는거지요.
생각의 차이 일수도 있겠습니다만
희소성이 있는제품도 아니고 굳이 리스토어까지 과잉정비도 필요없고
에폭시로 때워서 정상적으로 사용할수 있다면 그것이 최선이라 생각합니다
엔진블럭은 주철로되어있습니다.
주철용접은 까다로운용접중 하나입니다.
일반소비자분들은 하실수도 없습니다.
주철용접을하기위해서는 엔진오일도 비우고
엔진을 옆으로 누인상태에서 하는게 좋은데 작업이 까다롭게 됩니다.
Видео Buy a cultivator for $125 (mua một cái máy bán vé hạng 125 đô la ) канала 기술자뚝딱
I bought a kisidong cultivator on Mars for $125.00
Repair engine block using steel epoxy.
Start motor contact has been repaired.
I'm just telling you how to make it easy for anyone to do it.
In the past, I used to throw away the engine block because I couldn't use it.
Five thousand won can be used to fix it, but there's no reason to over-maintain it in a 20 year old cultivator.
It could be a difference of opinion.
It's not a rare product, and there's no need to over-maintain the store.
I think it's best if we can use it normally by using epoxy.
The engine block is made of cast iron.
Cast iron welding is one of the tricky welding.
Ordinary consumers can't do it.
To make a cast iron welding, empty the engine oil.
It's better to run the engine sideways, but it's going to be tricky.
누구나 할수있는 쉬운방법을 여러분께 알려드린겁니다.
예전에는 이런경우 엔진블럭 못쓴다고 폐기를 했습니다.
수리비 오천원정도면 해결할수 있는데 20년이 지난 경운기에 과잉정비를 할 이유는 없는거지요.
생각의 차이 일수도 있겠습니다만
희소성이 있는제품도 아니고 굳이 리스토어까지 과잉정비도 필요없고
에폭시로 때워서 정상적으로 사용할수 있다면 그것이 최선이라 생각합니다
엔진블럭은 주철로되어있습니다.
주철용접은 까다로운용접중 하나입니다.
일반소비자분들은 하실수도 없습니다.
주철용접을하기위해서는 엔진오일도 비우고
엔진을 옆으로 누인상태에서 하는게 좋은데 작업이 까다롭게 됩니다.
Видео Buy a cultivator for $125 (mua một cái máy bán vé hạng 125 đô la ) канала 기술자뚝딱
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
시골에서 빵꾸 때우기 - repair of a flat tire in the backyardRepair dump truck bumper with hoist only - 체인블럭 만으로 덤프트럭 범퍼 수리하기노보아크200K 실제용접 풀비드 영상(기계식주차장바닥보강공사)A video clip where anyone can change the sink faucet. 싱크대 수도꼭지 교환영상[기술인생] 12v 전동펌프 활용법What happens when you first repair a car? - 글루덴트 D.I.YWhat is it for? ㅡ 무엇에 쓰는 물건인고 ?Repairing large truck aluminum fuel tanks for only $10 -단돈 1만원 으로 덤프트럭 연료탱크수리[기술인생] 테크 ㅡ 키스위치교환자토바이 ㅡBicycle and motorcycle 자전거+오토바이지하주차장 벽 수리 - 벽체배수판Check Valve Principle - 체크밸브 원리트랙터 비닐피복기 만들기일요일 심심해서 라이브방송ㅡ질의응답 가능[다이소제품활용법]다이소 제품은 싸지만 내가 필요한건 없다.-없으면??? 만들면되지 ^^a broken compressor purchased from a junk shop - 3만2천원에 구입한 고장난 콤프레샤강남구 계단틈새 보수공사Put the wheels on the toy excavator - 장난감 굴착기에 바퀴를 올려주세요단돈 1만원짜리 경보기 성능은 ??? What is the performance of an alarm that costs only 10,000 won???보일러에서 물이샙니다 (부속값 6,600원-보일러나비소켓)벽체배수판 수리 - 푸르지오