How to Fix Pizza Wheel Marks from your Printer! 3 Easy Steps

**WINDOWS INSTRUCTIONS BELOW** What a costly and frustrating issue! Shortly after starting to sublimate, I ran into the frustrating pizza wheel issue. My prints would have lines of dots in them and they'd be visible upon final transfer to the sublimation blank. After lots of experimentation, the combo of these 3 steps helped fix the issue for my Epson WF-7710. Even if you have a different printer, something similar may help fix your issue too!

If all else fails, your paper may be too thick!
Get some A-Sub 120G weight paper:
8.5x11 - https://amzn.to/33mwPPI
11x17 - https://amzn.to/3d4t70t
13x19 - https://amzn.to/30sVOPf

-------------
Some key things that I can't live without in MY sublimation setup:
Epson WF-7710: https://amzn.to/3cTEJ68
A-Sub Sublimation Paper 13" x 19": https://amzn.to/30sVOPf
Heat Press Pillow 3 Pack: https://amzn.to/30r4mGk
Butcher Paper 100 Pcs: https://amzn.to/2Skfxwn
Desktop Heat Tape Dispenser: https://amzn.to/36t3y7G
WIDE!! Size Heat Tape: https://amzn.to/3lblSGS

******************************
WINDOWS STEPS:
The video shows Mac version of Step 2...
So here is the Windows version of Step 2:
- Open Control Panel
- Under hardware and sound
- Click view devices and printers
- Right click on the printer
- Select Printing Preferences.... On this screen: Turn Quiet Mode ON
- Click More Options on the top
- Under Additional Settings section..... *Uncheck* High Speed
- Click Maintenance on the top
- Click Extended Settings.... *Check* Thick Paper and Envelopes
******************************

DISCLAIMER: LINKS MAY BE AMAZON AFFILIATE LINKS

Видео How to Fix Pizza Wheel Marks from your Printer! 3 Easy Steps канала Venomous Design