Making A Powerful Micro Tesla Turbine [Full Video]
►Subscribe! https://bit.ly/2m1d1y7
►T-shirts & Hoodies! https://bit.ly/2kABytm
On this video I'm making a micro sized Tesla turbine motor that is being currently powered by compressed air. I'm already surpised by its performance, the torque seems to be sufficient to power a small generator and produce some useful amounts of electricity. All tests made with compressed air at 30psi. I'm really curious to see what it can do on steam.
I'd like to apologize for the assembly of the rotor itself for not appearing on the video, it's becasue for some reason the footage was way blurry and was absolutely not watchable.
Some interesting information about this Tesla turbine.
- The rotor has 12 discs (20mm diameter) with 0.18mm spacing.
- Clearance from the housing is 0.1mm.
- Clearance from the end caps is 0.18mm.
- Uses 2 micro bal bearings 2x5x2.5mm.
Support my videos!: https://www.patreon.com/johnnyq90
Subscribe to my channel! https://www.youtube.com/user/johnnyq90
Follow me on Vessel and watch my video earlier! https://www.vessel.com/channels/johnnyq90
Follow me on Twitter! https://twitter.com/JohnnyQ90
Follow me on Google+ https://plus.google.com/u/0/b/1046338...
Видео Making A Powerful Micro Tesla Turbine [Full Video] канала JohnnyQ90
►T-shirts & Hoodies! https://bit.ly/2kABytm
On this video I'm making a micro sized Tesla turbine motor that is being currently powered by compressed air. I'm already surpised by its performance, the torque seems to be sufficient to power a small generator and produce some useful amounts of electricity. All tests made with compressed air at 30psi. I'm really curious to see what it can do on steam.
I'd like to apologize for the assembly of the rotor itself for not appearing on the video, it's becasue for some reason the footage was way blurry and was absolutely not watchable.
Some interesting information about this Tesla turbine.
- The rotor has 12 discs (20mm diameter) with 0.18mm spacing.
- Clearance from the housing is 0.1mm.
- Clearance from the end caps is 0.18mm.
- Uses 2 micro bal bearings 2x5x2.5mm.
Support my videos!: https://www.patreon.com/johnnyq90
Subscribe to my channel! https://www.youtube.com/user/johnnyq90
Follow me on Vessel and watch my video earlier! https://www.vessel.com/channels/johnnyq90
Follow me on Twitter! https://twitter.com/JohnnyQ90
Follow me on Google+ https://plus.google.com/u/0/b/1046338...
Видео Making A Powerful Micro Tesla Turbine [Full Video] канала JohnnyQ90
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Micro Tesla Turbine Power TestHow to make Low RPM generator for wind turbine500 Horas tardé en fabricar este motor de 7 CilindrosMicro Tesla Turbine MK2 | Part3 | Finishing and TestingMaking A Twin Nitro EngineMaking an Old Aircraft Engine From Scratch | Solenoid EngineTwin Turbine Rotary Grinder Tool Powered by Vacuum CleanerTesla Valve | The complete physicsMicro Tesla Turbine MK2 | Part2 | Housing, End Caps, Nozzle16 Cylinder Gas Powered Stirling EngineModellversuch zum WärmekraftwerkMaking Electric Aluminum Foundry DIYI Upgraded the Gearbox of the Micro Supercharger and Then it ExplodedTesla Turbine [Smoke Flow Slow Mo]Tesla Turbine | The interesting physics behind itRC V4 Car Full Brake Disc System Test!How to make mini high speed Tesla Turbine from DC motorSolar Powered Stirling EngineThe Tesla Turbine & How it worksAssembling & Running a WORKING 4 Cylinder FOUR Stroke Model Engine - Toyan L400 Engine