Ortur Master 2 Pro 20W - Laser Engraver Unboxing, assembly and testing

ORTUR launches Laser Master 2 Pro , Bringing Engraving to the Next Level
Ortur Laser Master 2 Pro is specialized for manufacturers.

Product Links:
ORTUR Online Store：https://s.zbanx.com/r/ElGaWYNFlyfw

Laser module LU2-4 FAC (electric power: 20W, optical power: 4.5-5.5W) : https://s.zbanx.com/r/ElGaWYNFlyfw

Laser Master 2 Pro can support more functions. This is because the motherboard has been upgraded from the OLM-Max version to the OLM-Pro version. For example, the OLM-PRO motherboard supports new features such as flame detection and emergency stop.
The Laser Master 2 Pro is more reliable, because the 24V circuit system is used, the wires could support higher current, and this can support higher power laser modules and more add-ons.
The latest Ortur Laser 1.5 firmware is more powerful, because the Ortur engineer team optimized the motion algorithm based on the Ortur Laser 1.4 series firmware, increasing the maximum speed from 4000mm/min to 10000mm/min
The focal point of the LU2-4 laser module is smaller because it is the second-generation FAC laser module, the focal point is only 0.08 * 0.15mm, and the focal area is about one-quarter of the first-generation 0.23 * 0.23mm. So he can cut through 3mm plywood and 6mm pine board at one pass.
Laser Master 2 Pro has a longer service life. Because the mechanical structure has been specifically optimized, it can work stably for a long time at a faster speed.
You need just 10 - 15 minutes to install the machine.

It's not a original air assist, I did it quickly from an old co2 laser head like this https://s.click.aliexpress.com/e/_AAgkwd

#Ortur #Laser #Engraver

Видео Ortur Master 2 Pro 20W - Laser Engraver Unboxing, assembly and testing канала kukomio