An Algoma vessel with paint! The Algoma Mariner Departing Duluth with Petcoke June 07, 2021

The Algoma Mariner departing Duluth 6/7/2021 9:00:00 AM after spending a total of 15.4 hours in port, went on their way to Port Daniel, NS to deliver the Petcoke. Guessing it is going to their Cement Plant ?
Info from Boatnerd.com on this vessel:

Algoma Mariner was constructed by the Chengxi Shipyard in Jiangyin, Jiangsu, China as hull number CX0324, it was the second vessel constructed in Algoma Central Corporation’s bulk fleet renewal program (beginning in 2008 with the Algobay /Radcliffe R. Latimer forebody project) and the first all new Canadian laker to enter service since 1985.

Initially conceived as a forebody replacement for the 1978 built self-unloader Algoport along the same lines as the Algobay, the decision was made to construct an entirely new stern to attach to the completed forebody following the loss of the Algoport while under tow in the East China Sea on September 6, 2009. The new stern would prove to be of a similar design to that of the later Equinox Class new builds. The new vessel was originally intended to be operated by Seaway Marine Transport (a partnership between Algoma Central Marine and Upper Lakes Shipping) under the ownership of Upper Lakes Shipping as their Canadian Mariner (2). However, with the acquisition of the ULS fleet and their interest in SMT in February 2011 by Algoma Central, the name was changed again to Algoma Mariner. While she never sailed as Canadian Mariner, the name and ULS diamond stack logo were applied but went unpainted at the shipyard.

The Algoma Mariner’s forebody was launched in November 2009, but the completed vessel did not take to the water in her final form until late 2010 when she was floated off the dry-dock on which she had been completed. Sea trials took place during May 13-18, 2011 and following final preparations and painting, she was delivered to Algoma Central Corporation on May 31, 2011.

Built at a total cost of over $50 million, this modern, efficient vessel is constructed to Coastal Class specifications (allowing for operation on the Great Lakes and Eastern Seaboard). She measures 740' long by 77’ 11” and 49’ 03” deep. The self-unloader's 22 hatches feed into 6 holds where she can carry approximately 37,162 tons at the mid-summer draft of 35.9-feet. The vessel displaces 9,504 tons lightship. Her self-unloading equipment consists of a two-belt gravity fed system with a loop belt elevator that feeds a 262' stern mounted discharge boom that can be swung 95 degrees to port and starboard and unload at up to 5,440 tons per hour. Motive power is supplied by a single M.A.N 6L48/60CR 6-cylinder, slow speed diesel engine producing 9,792 BHP. Power is transmitted directly to a single controllable pitch propeller that can push her to a service speed of 14 knots. She is equipped with a bow thruster.
The living areas on the Algoma Mariner are well equipped and comfortable. Individual crew cabins feature specially designed private washrooms, sleep, work and sitting areas and each cabin is equipped with connections to broadband internet and satellite TV. The accommodations also include comfortable crew recreation facilities.

The new vessel departed China on June 4, 2011 at 10:45 am local time on her delivery voyage to the Great Lakes. After stopping at Davao, Philippines for fuel on June 21 to sustain her during the Pacific crossing, she transited the Panama Canal on July 23rd. The vessel arrived at her first Canadian port of call, Port Cartier, QC, on August 2 where she took on her first payload of iron ore pellets for Arcelor-Mittal Dofasco’s Hamilton, ON mill. Arriving off the Burlington Piers on the evening of August 7, she proceeded to Dofasco pier 21 to unload prior to shifting to pier 22 for approximately 7 days of minor repairs and modifications including a change in her port of registry from Toronto (a ULS hold-over) to Port Colborne. Following this work, she proceeded on her first upbound trip in ballast for Superior, Wisconsin to load coal.

A formal christening ceremony was held on her next downbound transit at Port Colborne on August 25, 2011, where she was dedicated and her new port of registry was affirmed to be in recognition of Algoma Central’s long standing association with the community. Within a few hours she resumed her transit destined for Sydney Nova Scotia and the beginning of her career on the Great Lakes and Coastal areas.

Written by Ted Wilush.
Ship Particulars
Length 740' 00" (225.55m)
Beam 77' 11" (23.75m)
Depth 49' 03" (15.01m)
Midsummer Draft 30' 10" (10.95m)
Unloading Boom Conveyor Length 250' (79.86m)
Capacity 37,162 tons
Engine Power 9,792 bhp diesel
Previous Names
Canadian Mariner (2) under construction
Algoma Mariner 2009 - Today

Видео An Algoma vessel with paint! The Algoma Mariner Departing Duluth with Petcoke June 07, 2021 канала Paul Scinocca