H22 Shifter Box Fabrication & Installation

The H22 gets a new shifter box. I made the opening cut a while back and left it open for a few weeks. I finally have complete the fabrication side of the project but I still need to remove everything, repaint and reassemble. I started by making a cut big enough for the bottom end of the shifter, basically allowing a good clearance. After i purchased some scrap metal, made up a nice box and welded it together. Lined up and inserted the box and welded it to the floor. I drilled out an opening for the cables, no ugly cut or anything, nice and clean and functional. It honestly came out nice. The headers got a fresh coat of paint and also look better than the attempt at polishing them. Merry Christmas

Видео H22 Shifter Box Fabrication & Installation канала Garage SpeCivic