DJI Mavic Mini: Unlock Authorization Zones plus 2 New Safety Features | Firmware v01.00.0400

DJI released a new firmware update for the Mavic Mini to unlock blue authorization zones.

Mavic Mini at DJI Store: http://bit.ly/30az0Bg
Mavic Mini at Amazon: https://amzn.to/2Kp0iyE

DJI FlySafe Website: https://www.dji.com/flysafe
Mavic Mini Downloads: https://www.dji.com/mavic-mini/downloads
Previous Video about Mavic Mini Authorization Zone: https://youtu.be/jZxyEpRpGyg

OVERVIEW:
- Date: 2019.12.31
- Aircraft Firmware: v01.00.0400
- Remote Controller: v01.00.0400
- DJI Fly App iOS: V1.0.4
- DJI Fly App Android: V1.0.4

WHAT'S NEW?
- Added feature to unlock GEO zones (requires DJI Fly v1.0.4 or later).
- Added feature that disables takeoff when the GPS signal is weak (GPS under 8) and the environment light is not sufficient. This feature can be disabled manually (requires DJI Fly v1.0.4 or later).
- Added requirement for compass calibration before takeoff when the environment light is not sufficient and the compass experiences interference.
- Adjusted flight altitude and distance in payload mode.
- Added warning prompt for battery cycles.
- Reduced noise during self-diagnostics after powering on.
- Fixed issue: linking was abnormal in some regions.

NOTES:
Note that the update may reset various main controller settings, such as the RTH altitude and the maximum flight distance, to default settings. Before updating, take note of your preferred DJI Fly settings, and readjust them after the update. If the update fails, restart aircraft, remote controller, and DJI Fly or DJI Assistant 2 for Mavic, and retry.

▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Support the channel by shopping via one of the affiliate links below:
Amazon: https://amzn.to/2LAVIPa
DJI Store: https://click.dji.com/ACnLy48PcINMcm6ddLy4

▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Gear I use: https://www.amazon.com/shop/kloogee

▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Facebook: https://www.facebook.com/kloogee
Twitter: https://www.twitter.com/kloogeetech
Instagram: https://www.instagram.com/kloogee/

▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Support our videos:
Patreon: https://www.patreon.com/kloogee
Donate Directly: https://www.paypal.me/kloogee/5

#MavicMini #FirmwareUpdate #Unlock

▬▬▬▬▬▬▬▬▬▬▬▬▬▬
DISCLAIMER: Some of the links here are affiliate links. If you buy something after clicking them, I will get a small commission at no additional cost to you. This commission helps to support this channel. Thanks!

Видео DJI Mavic Mini: Unlock Authorization Zones plus 2 New Safety Features | Firmware v01.00.0400 канала Daily Droning