Competition Sharp Longsword Pear V3 by Purpleheart Armoury
Competition Sharp made by Viktor Berbekucz in Hungary.
Designed in the USA by Purpleheart Armoury and Mike Edelson.
Features
Designed in the HEMA community as a competition level cutting blade.
Non-sharpened blades have proper cross section to allow you to finish out the blade to your desired level of sharpness.
Standard sharpened blades are done in house and have a simple 20 degree angle edge to them.
Note from Victor:
This sword is different from our other blades, we spend extra time making a strong blade to meet the rigors of tatami cutting competitions. Forging is one of the activities of the manufacturing process. There are blades and parts for which only tapering is done with smithing and some that are made entirely by forging. Each sword is different, but the competition sharp is heavy forged.
Because of the tapering the material of the blade can never be 100% of the same thickness over the entire length, due to forging and straightening with the hammer. This causes a small surface defect in the middle of the blade in some places: where the thickness of the material differs by 0.3-0.4 mm and creates small signs of surface roughness. This is not a mistake or quality problem. This can be eliminated by grinding the entire blade thinner, which in turn would make the blade weaker. So that’s not an option.
Overall Length: 46.43" (1180mm)
Guard Width: 9" (228mm)
Blade Width Near Guard: 2.9" (75mm)
Blade Length: 35.43" (900mm)
Blade Material: 51 CRV4 Carbon Steel
Grip Length: 9" (229mm)
Grip Material: Brown Leather Grip or Cord Wrap
Center of Balance: 4.7" (119mm) from Crossguard
Center of Percussion: Apx xx" (xxx mm) from Crossguard
Weight: 3lb 9oz (1.61kg)
Pommel: Peened
#swordreviews #katanareviews #medievalswords
Видео Competition Sharp Longsword Pear V3 by Purpleheart Armoury канала EDGED mindset
Designed in the USA by Purpleheart Armoury and Mike Edelson.
Features
Designed in the HEMA community as a competition level cutting blade.
Non-sharpened blades have proper cross section to allow you to finish out the blade to your desired level of sharpness.
Standard sharpened blades are done in house and have a simple 20 degree angle edge to them.
Note from Victor:
This sword is different from our other blades, we spend extra time making a strong blade to meet the rigors of tatami cutting competitions. Forging is one of the activities of the manufacturing process. There are blades and parts for which only tapering is done with smithing and some that are made entirely by forging. Each sword is different, but the competition sharp is heavy forged.
Because of the tapering the material of the blade can never be 100% of the same thickness over the entire length, due to forging and straightening with the hammer. This causes a small surface defect in the middle of the blade in some places: where the thickness of the material differs by 0.3-0.4 mm and creates small signs of surface roughness. This is not a mistake or quality problem. This can be eliminated by grinding the entire blade thinner, which in turn would make the blade weaker. So that’s not an option.
Overall Length: 46.43" (1180mm)
Guard Width: 9" (228mm)
Blade Width Near Guard: 2.9" (75mm)
Blade Length: 35.43" (900mm)
Blade Material: 51 CRV4 Carbon Steel
Grip Length: 9" (229mm)
Grip Material: Brown Leather Grip or Cord Wrap
Center of Balance: 4.7" (119mm) from Crossguard
Center of Percussion: Apx xx" (xxx mm) from Crossguard
Weight: 3lb 9oz (1.61kg)
Pommel: Peened
#swordreviews #katanareviews #medievalswords
Видео Competition Sharp Longsword Pear V3 by Purpleheart Armoury канала EDGED mindset
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
So. Many. Microtech. MSI Knives.Let Me Clear This Up #edgedmindset #unemployed #jobsearchAGA Campolin Batwing Swinguard Stiletto Switchblade #Switchblade #Stiletto #italianknifeOden Customs Ripper ReviewWTF is a DOUBLE DETENT and why was it invented?!Redencion Booger #shorts #chavesknives #redencion #carterthomasIs a Full Custom Borka Stitch Worth The Money?My CHUB Is Automatic?! - C.H.U.B. OTF Utility Knife From Chaves KnivesThe Hell Razor 2 From Busse Combat!Microtech SCARAB II OTF automatic SWITCHBLADE Review @Edged Mindset #switchblade #shortsMy Number One Spyderco? Manix 2 Full ReviewCold Steel Atlas Lock Vs. Demko Shark LockSo close to perfect! - Miguron Dromos FlipperIt Can't Be THAT Good, Right?STRIDER STILL MAKES CUSTOMS?! | Mick Strider Custom SMF DGG Nightmare Ground BladeStill a WIN Despite it's ISSUE?! Midgards Messer BIG Viking V2 Folder!BUT HOW?! ALL NEW Sandshark OTF From Desert Knife Works!Best Hinderer ever?! XM-18 3.5 full Titanium #hinderer #shorts #edcknife #knifereviewGroup run J-CAPE 3.5 from SOC #jcape #somethingobscene #flipperHail Hydra! Heretic Hydra V3 Unboxing