3D printed flexible ranging probe for LaserPecker 2

After 4 revisions, here is my final design. Note that you may need to use a sharp knife to cut open the tiny / gap if the moving part and the stationary part are stuck together.

At 0.1mm layer height, it takes about 1.15m of filament and about 40 minutes to print.

STL file: https://github.com/yy502/laserpecker-review/blob/master/misc/LP2_110mm_probe.stl

Видео 3D printed flexible ranging probe for LaserPecker 2 канала yy502tube