How to Change a Piston | KTM 450/530 EXC | BLDH
The bikes 2nd Piston Change. My Supermoto Ktm 530 EXC. A how to on how i did the swap. I was supposed to change the Cam Chain too but I had borrowed the wrong special tool. So 1 week later i did the swap. My bike had blow-by symptoms with the old piston, and im hoping to seal the piston rings good and tight with a hard break in. The 530 has the XC4 motor, which is basically the same for newer (2012 and forward) exc-bikes such as the 500 exc. For the RFS (2003-2007) motor i recomend another video which i'll link down bellow.
Funny bloopers: https://www.youtube.com/watch?v=FpdEavZYsc0
First start up: https://www.youtube.com/watch?v=XSf0V9lzYCA
Other videos i recommend:
RFS (ktm 525 exc) piston change: https://www.youtube.com/watch?v=G6lFFXk_btY
CRF (honda 450 crf) piston change: https://www.youtube.com/watch?v=b5FI5V4xLvQ
I bought my piston parts from KTM-shop (LellesMC)
Realistic time for you first time doing this: 8 h
you shouldn't talk while doing mechanic stuff.. takes way longer time. but it gets more structured that way.
At Friday i started collecting tools at 9 pm. and then i called it a day at midnight by then i had gotten down to the cylinder. Then the next day (sat) i started working at 6 pm and left at 10 pm with the bike almost done. So considering im vloging + late night mechanic + my first time doing this + many mistakes = 8 hours, but next time I feel like i could do it in 3h.
(MANUAL) KTM 530/450 EXC 2008-2011 (XC4) manual: http://www.karlstrommotor.se/upload/PDF/KTM08/repmanual450_540exc08.pdf
Thank you for watching and if there is anything you have a question about.. comment down bellow
// BLDH
Видео How to Change a Piston | KTM 450/530 EXC | BLDH канала BLDH
Funny bloopers: https://www.youtube.com/watch?v=FpdEavZYsc0
First start up: https://www.youtube.com/watch?v=XSf0V9lzYCA
Other videos i recommend:
RFS (ktm 525 exc) piston change: https://www.youtube.com/watch?v=G6lFFXk_btY
CRF (honda 450 crf) piston change: https://www.youtube.com/watch?v=b5FI5V4xLvQ
I bought my piston parts from KTM-shop (LellesMC)
Realistic time for you first time doing this: 8 h
you shouldn't talk while doing mechanic stuff.. takes way longer time. but it gets more structured that way.
At Friday i started collecting tools at 9 pm. and then i called it a day at midnight by then i had gotten down to the cylinder. Then the next day (sat) i started working at 6 pm and left at 10 pm with the bike almost done. So considering im vloging + late night mechanic + my first time doing this + many mistakes = 8 hours, but next time I feel like i could do it in 3h.
(MANUAL) KTM 530/450 EXC 2008-2011 (XC4) manual: http://www.karlstrommotor.se/upload/PDF/KTM08/repmanual450_540exc08.pdf
Thank you for watching and if there is anything you have a question about.. comment down bellow
// BLDH
Видео How to Change a Piston | KTM 450/530 EXC | BLDH канала BLDH
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
2015 KTM 250 EXC-F Engine Top End Rebuild (Four Stroke)First Start UP after rebuild | KTM 530 EXC | BLDHDIRT BIKE - Cylinder and Piston Replacement / Service CRF 250 450 R - Parts and tools in descriptionKTM 500 EXC-F Six Days Supermoto Full BuildMORE HORSEPOWER TO MY KTM! (DynoJet) | Supermoto BuiLDH #10 | BLDHAlways use PROTECTION!!! | Supermoto BuiLDH #8 | BLDH$900 dirt bike KTM 250SX complete rebuild - time lapseMotorcycle Top End Rebuild for 4-Stroke (Part 2 of 2)How To Adjust the Valves on a KTM MotorcycleRIFACCIAMO IL MOTORE DEL 450 | TUTORIALSonic disassembles the KTM RFS Engine Part 1(Timelapse) Beautiful 4-Stroke Engine Rebuild + 1st Start!TUTO - CHANGER SON PISTON SUR SA MOTO 4 TEMPS !! 1/2Ktm sx-f 450 repair of the damaged head of engine.ENTRETIEN KTM 530 EXC-R 08-11ktm 525 2008 demontage moteur partie 2 scummybraapKTM RFS Top End Tear Down | 2007 KTM 450 EXC | 2XKTM DDS Clutch Inspection & ReplacementTop End Rebuild - 2018 KTM/Husqvarna FE350/EXC-FVlog : KTM 530 Top End and Clutch