Making a Giant Fiberglass Bowl | Koi Pond Pt 2

Awhile ago, I finished a waterjet cut aluminum fountain base for a koi pond. It was time to turn that sculpture into a fountain by building an 8' Diameter Fiberglass Bowl! But first, I would need a mold...

This process could be used for a wide variety of processes, especially where accuracy needs to be maintained. I documented the entire process over a few months of work. If anyone needs a giant bowl, let me know because I have a mold for one.

Here is a list of the products I used on this project.

Fomular 250 2" Pink Foam
https://www.homedepot.com/p/Owens-Corning-FOAMULAR-250-2-in-x-48-in-x-8-ft-R-10-Scored-Squared-Edge-Foam-Board-Insulation-Sheathing-52DD/202085962

West Systems 105 Epoxy Resin
https://www.jamestowndistributors.com/product/product-detail/3760

West Systems 207 Special Clear Hardener
https://www.jamestowndistributors.com/product/product-detail/2032

West Systems 403 Microfiber Filler
https://www.jamestowndistributors.com/product/product-detail/2038

West Systems 501 White Tint
https://www.jamestowndistributors.com/product/product-detail/3765

1.5 Ounce Chopped Fiberglass Mat
https://www.jamestowndistributors.com/product/product-detail/2067

6 Ounce Woven Fiberglass Cloth
https://www.jamestowndistributors.com/product/product-detail/2070

Total Boat Laminating Resin
https://www.jamestowndistributors.com/product/product-detail/2082

Total Boat Finishing Resin
https://www.jamestowndistributors.com/product/product-detail/2081

The above are NOT affiliate links. I have received no compensation for them and I am providing them simply as a way for you to easily know what products worked for me and where I ordered them.

Видео Making a Giant Fiberglass Bowl | Koi Pond Pt 2 канала Brian Oltrogge