Convoy S2+ Triple Led Build. Step By Step Build Tutorial.

That's right we are going to build a Custom Convoy S2+ with a triple Led, Glow Gasket and a FET +7135 Driver.

This little light is super bright with a good Flood beam. The firmware that I am using on the driver is the Guppy Dual firmware that has 22 programmable modes (11 with memory & 11 without memory)

This light get really hot on high at around 25-30 seconds so setting the Turbo/High timer that will step the light down from 100% to 50% is very important!

More Related Videos Below.

Tail Spring Bypass Video: https://www.youtube.com/watch?v=PqDfqklpbws

Convoy C8 Green Hunting Light Build: https://youtu.be/K5vsjwZITpw

All the parts I purchased for this build and more can be found here Except The Glow Gasket which I contacted Strong Lights On Facebook To Purchase The Gasket. https://www.mtnelectronics.com/index.php

Видео Convoy S2+ Triple Led Build. Step By Step Build Tutorial. канала Lux Lumen