Cutter for laminar Nozzle 2nd Attempt.flv
Don't ask why i abandoned first cutter mechanism... :) This is because i didn't took risk on my 12V solenoid to test it with 24VDC supply...
The 1st cutter was not working with the same 12V supply to solenoid and 2nd also not worked with 12V supply... but in the second attempt of cutter i tried 24V DC with the same 12V solenoid and that worked as shown in video.. I bit the 1st cutter might also worked well with 24VDC supply...
Two things to clarify:
1- This is not solenoid valve. But a solenoid alone ;)
2- This is 12 V solenoid valve not 16V solenoid.
Sorry for mistakes.
Видео Cutter for laminar Nozzle 2nd Attempt.flv канала Khalid Khattak
The 1st cutter was not working with the same 12V supply to solenoid and 2nd also not worked with 12V supply... but in the second attempt of cutter i tried 24V DC with the same 12V solenoid and that worked as shown in video.. I bit the 1st cutter might also worked well with 24VDC supply...
Two things to clarify:
1- This is not solenoid valve. But a solenoid alone ;)
2- This is 12 V solenoid valve not 16V solenoid.
Sorry for mistakes.
Видео Cutter for laminar Nozzle 2nd Attempt.flv канала Khalid Khattak
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
LOW COST DC MOTOR EXPERIMENTATION3d delta Printer- Crash Happens3D printing- Cyclone SeperatorCan't wait to go home #shorts3D Scanning artworkUpdates on solar Sensor adjustment Mechanism.flv3d Printing Gothic Roman ColumnImproved Solar Tracker with LCD.flvSupport Pillar modelling and 3d printingSolar Panel Suntracker Revised.flvDavid Laser Scanner and Arduino PART2.wmvMy CNC Optimus Prime 4G at 700 IPMCA45 DATA CABLE TO ARDUINO.flvGraphical Waterfall -Proteus with VB6 interaction - Virtual USB portEggBot remaining parts 3d printingEfficient Sun Tracking in a Cloudy day .flvCNC RouterGRAPHICAL WATERFALL SOFTWARE TESTMy Solar Panel System with Single Axis Tracking.flvMy Sports Car Honda S660 #shortsGraphical Waterfall-Programming Simulation