How to disable the Auto Stop/Start System in a late model GM vehicle

If you enjoyed this video, please consider supporting the channel by subscribing, ringing the bell, and checking out my other videos to ensure more videos like this will be made in the future!

Do you drive a late model GM vehicle with the dreaded Auto Stop/Start system? Are you annoyed by the lack of a button or switch to disable the system? In this quick video, I show you how to temporarily disable the system without spending any money on a dedicated override device (which can cost upwards of $350.)

Method 1: Shift into "L" and depress the Upshift Button (marked with a +) and observe the shift indicator. Keep pressing the + button until you reach the vehicle's highest gear. On my 2016 Cruze, this was L6, as the car has a 6-Speed automatic. Other GM's may have 8 or 9 forward gears, depending on the model.

Method 2: With the vehicle off, raise the hood and prop it open if your vehicle has a prop. With the hood raised, start the vehicle. Lower the hood and place the gearshift into "D" as you normally would. (Obviously if you have to back out of a spot, go into Reverse first, then Drive!)

Note that both of these procedures will need to be repeated each time you start the vehicle.
Thanks for watching! Any questions or comments, please post below. If you found this informative or helpful in any way, give a the video a thumbs up! Be sure to check out my other videos and hit the subscribe button!

Music in this video is from http://www.bensound.com

Видео How to disable the Auto Stop/Start System in a late model GM vehicle канала Certified Shadetree