DIY Keg Washer

Washing kegs and carboys can be a pain. Here's a project I've wanted to tackle for quite some time and it's finally here. The DIY Keg Washer.
Nothing more than a pump in a bucket and about 7 or 8 dollars worth of PVC parts.

The plans and parts list come from the Brülosophy website: http://brulosophy.com/2016/12/22/brublaster-keg-carboy-washer-do-it-yourself/ I've listed below the parts that I used.

Keg Spray Wand:

3/4″ Female NPT x Female HT Swivel PVC Fitting
3/4″ Female Slip to 3/4″ Male Pipe Thread Adapter
2″ piece of 3/4″ PVC Pipe (cut from 2′ pipe listed below)
3/4″ Slip Tee x 3/4″ Female NPT branch
3/4″ x 2′ PVC Pipe
3/4″ PVC Slip Cap
3/4″ Male NPT Hose Nipple

Keg posts and dip tube cleaning assembly:

3/8″ Female Hose Adapter
40″ of 3/8″ ID vinyl tubing
3/8″ PVC Tee Fitting
Barbed Gas Disconnect
Barbed Liquid Disconnect
(7) Small Hose Clamps

Видео DIY Keg Washer канала No Stress Brewing