FE Ford Cylinder Head Rebuild - Serdi 4.5 Three Angle Valve Job
This video walks through the entire process of remanufacturing a set of FE Ford cylinder heads for a nearly bone stock 390 FE we are building in the shop.
These heads get cleaned and inspected before all new valve guides and valve seats are installed in the head.
After the multi-angle valve job is performed on our new Serdi 4.5 valve seat machine we finish these heads off with resurfacing the intake manifold surface, exhaust manifold surface, and head gasket surface. Finally they are reassembled with new valves, springs, valve stem seals, keepers, and the stock retainers.
Equipment Used:
-Peterson Industrial Bake Oven
-Steelabrator Steel Shot Blast Machine
-Peterson TCM-25 Valve Seat and Guide Machine
-Serdi 4.5 Valve Seat and Guide Machine
-Rogers Machine Company RMC-1000 Surfacing Mill
-Kansas Instruments/Peterson Spray Cabinet
-Various additional hand tools
Parts List:
-D2TE-AA Cylinder Heads
-SBI Intake Seats
-SBI Exhaust Seats
-SBI Valve Guides
-Engine Pro Intake Valves
-Engine Pro Exhaust Valves
-Engine Pro Valve Springs
-EOK Valve Stem Seals
-Pioneer Valve Keepers
-Ford OEM Retainers
Instagram: @jamsionline
Facebook: JAMSI Online
TikTok: @jamsionline
Website: www.jamsionline.com
Outro Music --
Freedom - Atch https://soundcloud.com/atch-music
Creative Commons — Attribution 3.0 Unported — CC BY 3.0
Free Download / Stream: https://bit.ly/al-freedom
Music promoted by Audio Library https://youtu.be/whLknQE4tSU Amazon Affiliate Page (Commissions Earned)
https://www.amazon.com/shop/jamsionline
Видео FE Ford Cylinder Head Rebuild - Serdi 4.5 Three Angle Valve Job канала Jim's Automotive Machine Shop, Inc.
These heads get cleaned and inspected before all new valve guides and valve seats are installed in the head.
After the multi-angle valve job is performed on our new Serdi 4.5 valve seat machine we finish these heads off with resurfacing the intake manifold surface, exhaust manifold surface, and head gasket surface. Finally they are reassembled with new valves, springs, valve stem seals, keepers, and the stock retainers.
Equipment Used:
-Peterson Industrial Bake Oven
-Steelabrator Steel Shot Blast Machine
-Peterson TCM-25 Valve Seat and Guide Machine
-Serdi 4.5 Valve Seat and Guide Machine
-Rogers Machine Company RMC-1000 Surfacing Mill
-Kansas Instruments/Peterson Spray Cabinet
-Various additional hand tools
Parts List:
-D2TE-AA Cylinder Heads
-SBI Intake Seats
-SBI Exhaust Seats
-SBI Valve Guides
-Engine Pro Intake Valves
-Engine Pro Exhaust Valves
-Engine Pro Valve Springs
-EOK Valve Stem Seals
-Pioneer Valve Keepers
-Ford OEM Retainers
Instagram: @jamsionline
Facebook: JAMSI Online
TikTok: @jamsionline
Website: www.jamsionline.com
Outro Music --
Freedom - Atch https://soundcloud.com/atch-music
Creative Commons — Attribution 3.0 Unported — CC BY 3.0
Free Download / Stream: https://bit.ly/al-freedom
Music promoted by Audio Library https://youtu.be/whLknQE4tSU Amazon Affiliate Page (Commissions Earned)
https://www.amazon.com/shop/jamsionline
Видео FE Ford Cylinder Head Rebuild - Serdi 4.5 Three Angle Valve Job канала Jim's Automotive Machine Shop, Inc.
Показать
Комментарии отсутствуют
Информация о видео
6 декабря 2020 г. 21:00:15
00:40:43
Другие видео канала
Farmall H Engine Block Repair - The hard way!Porting cylinder heads to optimize engine performance | Hagerty DIYUpgrading a set of 327 Small Block Chevy Connecting Rods w/ ARP Bolts on a Sunnen HoneMaking and replacement of valve seat. The cylinder head from Honda 450cc - Foreman 450 - TRX 450 SCYLINDER HEAD REBUILD VTEC D16Y8 | CIVIC EGAftermarket Cylinder Heads - Why You Shouldn't Just Bolt Them On - Part 3 - TRRC / VortecproUsing A Crankshaft Grinder To Modify A Set Of Engine Valves - '68 Firebird 350 Engine Rebuild - Pt 3Engine Block Inspection and Cylinder Boring SCCSTEVE TECH EPISODE 5 valve jobCylinder Honing SCCSerdi 100 (SOLD)How to do a True 3 Angle Valve Job SUPER CHEAP Using Neway Tools (as good as any pro machine shop!)Building a 427 Stroker from a Ford Boss 351 Block - HorsePower S15, E66076 John Deere Engine Block Machining - Lower Bore Repair Sleeves - Deck ResurfaceRebuilding A Set Of Subaru WRX STI Cylinder Heads - Valve Job -@Jim's Automotive Machine Shop, Inc.455 Oldsmobile Engine Mild Rebuild - Part 1: Teardown - JAMSI OnlineBroken & Siezed Bolt Removal, DR 650 Cylinder HeadHOW TO: FORD 390 FE CYLINDER HEADMachining Flywheel, Crankshaft, Camshaft & Engine HeadIntroduction of my valve seat cutting machine.