FIRST LOOK AUDI RS3 SPORTBACK 2022 | TRACK DRIVING | EXHAUST SOUND | UNIQUE EXTERIOR & DETAILS
#CarShowcase #audirs32022
#audirs3202firstlook #audiRS32022firstdetails
#audiRS3Sportback2022 #audiRS3Sportback2022exterior
#audiRS3Sportback2022details #audiRS3Sportback2022firstlook
#audiRS3Sportback2022exhaustsound #audiRS3Sportback2022teaser
#audiRS3Sportback2022releasedate #audiRS3Sportback2022premiere
#audiRS3Sportback2022worldpremiere #audiRS3Sportback2022exhaust
#audiRS3Sportback2022sound #audiRS3Sportback2022driving
#audiRS3Sportback2022track #audirs3sportback2022
#audirs3sportback2022driving #audirs3sportback2022exhaustsound
#audirs3sportback2022exhaust #audirs3sportback2022sound
#audirs3sportback2022enginesound #audi2022 #audicars #audirscars #audirs32022
Official Audi footage of the new RS3 Sportback 2022 with camo wrap on. In this video you can see the exterior details, and full reveal is scheduled for next month!!
DETAILS ABOUT THE CAR :
The Audi RS 3 prototype represents the epitome of unadulterated driving dynamics. This is Audi’s first vehicle to feature the RS Torque Splitter, which distributes drive torque between the rear wheels in a fully variable manner. Due to the difference in propulsive forces, the car turns into the curve even better and follows the steering angle more precisely. This results in less understeer, earlier and faster acceleration when exiting corners, and particularly precise and agile handling – for added safety and faster lap times on the racetrack.
How does the RS Torque Splitter work?
The RS Torque Splitter makes active, fully variable torque vectoring between the rear wheels possible. Unlike the rear axle differential and the previous multiple disc clutch package on the rear axle, the torque splitter uses one electronically controlled multiple disc clutch each on the respective drive shaft. During dynamic driving, the torque splitter increases the drive torque to the outer rear wheel with the higher wheel load, which significantly reduces the tendency to understeer. In left-hand curves, it transmits the torque to the right rear wheel, in right-hand curves to the left rear wheel, and when driving straight ahead to both wheels. This results in optimal stability and maximum agility – especially when cornering at high speeds. When driving on closed roads, the torque splitter enables controlled drifts by applying all of the engine power at the rear axle to just one of the rear wheels – up to a maximum of 1,750 newton meters of torque. The exact distribution of drive torque always depends on the mode selected in Audi drive select and the respective driving situation.
Each of the two multiple disc clutches has its own control unit, which use the electronic stabilization control’s wheel speed sensors to measure the wheel speeds. Other influencing factors include longitudinal and lateral acceleration, the steering angle, the position of the gas pedal, the selected gear, and the yaw angle, i.e. the rotational movement around the vertical axis. In addition, the torque splitter is connected to the modular vehicle dynamics controller as a higher-level entity.
How is the torque splitter integrated into the driving dynamics system?
Audi drive select modifies the characteristics of the torque splitter and thus the car’s handling depending on the selected mode. Five characteristic curves – Comfort/Efficiency, Auto, Dynamic, RS Performance, and RS Torque Rear – are saved in the system. In this context, engine power is distributed to all four wheels in the Comfort/Efficiency modes, with priority given to the front axle. In Auto mode, torque distribution is balanced, which means that the RS 3 prototype neither understeers nor oversteers. Dynamic mode, on the other hand, tends to transmit as much drive torque as possible to the rear axle – for maximum agility and increased dynamics. This is taken to perfection in RS Torque Rear mode, which allows drivers to perform controlled drifts on closed roads. The highly rear-heavy distribution of the engine power leads to oversteering behavior, with up to 100 percent of the drive torque directed to the rear ending up at the wheel on the outside of the curve.
Видео FIRST LOOK AUDI RS3 SPORTBACK 2022 | TRACK DRIVING | EXHAUST SOUND | UNIQUE EXTERIOR & DETAILS канала Car Showcase
#audirs3202firstlook #audiRS32022firstdetails
#audiRS3Sportback2022 #audiRS3Sportback2022exterior
#audiRS3Sportback2022details #audiRS3Sportback2022firstlook
#audiRS3Sportback2022exhaustsound #audiRS3Sportback2022teaser
#audiRS3Sportback2022releasedate #audiRS3Sportback2022premiere
#audiRS3Sportback2022worldpremiere #audiRS3Sportback2022exhaust
#audiRS3Sportback2022sound #audiRS3Sportback2022driving
#audiRS3Sportback2022track #audirs3sportback2022
#audirs3sportback2022driving #audirs3sportback2022exhaustsound
#audirs3sportback2022exhaust #audirs3sportback2022sound
#audirs3sportback2022enginesound #audi2022 #audicars #audirscars #audirs32022
Official Audi footage of the new RS3 Sportback 2022 with camo wrap on. In this video you can see the exterior details, and full reveal is scheduled for next month!!
DETAILS ABOUT THE CAR :
The Audi RS 3 prototype represents the epitome of unadulterated driving dynamics. This is Audi’s first vehicle to feature the RS Torque Splitter, which distributes drive torque between the rear wheels in a fully variable manner. Due to the difference in propulsive forces, the car turns into the curve even better and follows the steering angle more precisely. This results in less understeer, earlier and faster acceleration when exiting corners, and particularly precise and agile handling – for added safety and faster lap times on the racetrack.
How does the RS Torque Splitter work?
The RS Torque Splitter makes active, fully variable torque vectoring between the rear wheels possible. Unlike the rear axle differential and the previous multiple disc clutch package on the rear axle, the torque splitter uses one electronically controlled multiple disc clutch each on the respective drive shaft. During dynamic driving, the torque splitter increases the drive torque to the outer rear wheel with the higher wheel load, which significantly reduces the tendency to understeer. In left-hand curves, it transmits the torque to the right rear wheel, in right-hand curves to the left rear wheel, and when driving straight ahead to both wheels. This results in optimal stability and maximum agility – especially when cornering at high speeds. When driving on closed roads, the torque splitter enables controlled drifts by applying all of the engine power at the rear axle to just one of the rear wheels – up to a maximum of 1,750 newton meters of torque. The exact distribution of drive torque always depends on the mode selected in Audi drive select and the respective driving situation.
Each of the two multiple disc clutches has its own control unit, which use the electronic stabilization control’s wheel speed sensors to measure the wheel speeds. Other influencing factors include longitudinal and lateral acceleration, the steering angle, the position of the gas pedal, the selected gear, and the yaw angle, i.e. the rotational movement around the vertical axis. In addition, the torque splitter is connected to the modular vehicle dynamics controller as a higher-level entity.
How is the torque splitter integrated into the driving dynamics system?
Audi drive select modifies the characteristics of the torque splitter and thus the car’s handling depending on the selected mode. Five characteristic curves – Comfort/Efficiency, Auto, Dynamic, RS Performance, and RS Torque Rear – are saved in the system. In this context, engine power is distributed to all four wheels in the Comfort/Efficiency modes, with priority given to the front axle. In Auto mode, torque distribution is balanced, which means that the RS 3 prototype neither understeers nor oversteers. Dynamic mode, on the other hand, tends to transmit as much drive torque as possible to the rear axle – for maximum agility and increased dynamics. This is taken to perfection in RS Torque Rear mode, which allows drivers to perform controlled drifts on closed roads. The highly rear-heavy distribution of the engine power leads to oversteering behavior, with up to 100 percent of the drive torque directed to the rear ending up at the wheel on the outside of the curve.
Видео FIRST LOOK AUDI RS3 SPORTBACK 2022 | TRACK DRIVING | EXHAUST SOUND | UNIQUE EXTERIOR & DETAILS канала Car Showcase
Комментарии отсутствуют
Информация о видео
25 июня 2021 г. 20:09:01
00:03:23
Другие видео канала




















