Загрузка страницы

Connecting to a 300 Series PLC in Step 7 v5 5 via Ethernet

Connecting to a 300 Series PLC in Step 7 v5.5 via Ethernet

1. Windows Network Connections -- Give computer a static IP in the same subnet as the PLC

2. Windows Set PG/PC Interface -- Set PG/PC interface to ethernet card at TCP/IP 1

3. Simatic Manager Edit Ethernet Node -- Factory Reset PLC

4. Simatic Manager -- Create new PLC Station

5. HW Config -- Set PLC's IP Address

6. HW Config -- Set PLC's Profinet Name

7. HW Config -- Turn on Clock Byte

8. HW Config -- download hardware configuration to PLC

9. Windows Command Prompt -- Ping PLC

10. Simatic Manager -- create VAT

11. Var Editor -- add clock byte

12. Var Editor -- go online to confirm connection with PLC

Видео Connecting to a 300 Series PLC in Step 7 v5 5 via Ethernet канала John Machado
Показать
Комментарии отсутствуют
Введите заголовок:

Введите адрес ссылки:

Введите адрес видео с YouTube:

Зарегистрируйтесь или войдите с
Информация о видео
31 августа 2018 г. 23:36:41
00:11:14
Яндекс.Метрика