Headlight restoration in under 60 seconds (read description)

So first of all sand headlight with 1200 grit wet n dry sand paper, keeping headlight wet, sand back, rinse thoroughly and dry.
Tape and cover existing bodywork as needed, clear coat with a light coat first, wait for it to dry or about 15 minutes then go again with another coat .

This video was filmed in a different ratio, for my Instagram channel hence the reason its not very clear, also this is my own car and not a customers car.
If it were a customer's car, I would have taped up during the sanding process also, to ensure I didn't catch the bodywork with the sand paper, I would've also covered the body more to protect from clear coat over spray .

Thanks for watching 👍🏼

Видео Headlight restoration in under 60 seconds (read description) канала LT_TOMMY