Blacksmithing - Making a holdfast for the anvil forging a hold down tool 2020

Blacksmithing - Making a holdfast for the anvil.After so many years of dropping things off the anvil i decided to make something that will finally keep things where i want them, so behold the forged holdfast or hold down tool for the anvil. I had to put a bend in it as the hole was too big for the size of material i used, i should have used 25mm but didnt have any so i used some 20mm square mild steel bar.

Видео Blacksmithing - Making a holdfast for the anvil forging a hold down tool 2020 канала Working With Iron Nathan