DN 300 ( 12 inch )HOT TAPPING WITH TONISCO SYSTEM
DN 300 Hot Tapping was carried out using DN 300 TONISCO Hot tapping valves. The size of the mainline was DN 500 and the material of the mainline was construction steel. The pressure in the mainline during the hot tapping was 6,0 bar. The hot tapping work was carried out by TONISCO HOT TAPPING SERVICE and the whole procedure at whole took less than 5 hours.
For more infromation about TONISCO Hot Tapping equipment and Services contact us at sales@tonisco.fi or trough our homepage at www.tonisco.com
Видео DN 300 ( 12 inch )HOT TAPPING WITH TONISCO SYSTEM канала Tonisco University
For more infromation about TONISCO Hot Tapping equipment and Services contact us at sales@tonisco.fi or trough our homepage at www.tonisco.com
Видео DN 300 ( 12 inch )HOT TAPPING WITH TONISCO SYSTEM канала Tonisco University
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Hot Tap and Stopple Bypass at Smoky Lake - Part 1IFT 8" Insert Valve Install at the University of Southern CaliforniaMLT3401 Direct Tap Machine VideoHot Tapping & Plugging: Leak-tight Double Block and Bleed Isolation of High Pressure Gas Pipelines30 Minutes Of Amazing Machinery & Most Admirable Worker Ever Before #2TD Williamson - Welding on In service Pipelines (1993)Hot Tap on water mainTD Williamson In Service WeldingFOX FITTINGS Hot Tapping - Saddle 400/225, Nawiercanie pod ciśnieniem- Siodło 400/225SANIT nawiercanie rurociągów pod ciśnieniemHOT TAPPING WITH TONISCO B30 USING FLANGED WELDABLE TEE AND FLANGED GATE VALVEPipeline Welding - 42 Inch Tie-InHot-Tapping - Canlı Hat Delme OperasyonuWater pipe hot tapping DN150 using TONISCO B30Cutting ductile water main with chain cutterTap Master, Inc. - Hot Tap & Line Stop DemoFabricating/Welding on a FlangeMueller B-101 Drilling & Tapping MachineWater Line RepairGreat Work Pipeline Hot Tap Installation and Best Teamwork to Hot Tapping and Plugging