Is It Worth Tearing Down A Printer For The Parts?
In this video I'm going to attempt to answer to question: Is It Worth Tearing Down A Printer For The Parts? You'll see how I disassemble an old Epson printer for it's parts to be used in electronic projects and other items on the model railroad.
It took me over 2 hours to get the printer apart and seperate the good parts from the not so useful parts. There were much less useful parts that discard-able parts in this project.
This video was recorded in April 2018 and has been hiding in my computer ever since then. I rendered it and never uploaded it to YouTube. I changed the intro and ending in this video, but the middle remains the same. There was about a 30 minute section that I reduced to a few minutes where I was fighting the unforgiving frame of the printer.
SHOP FOR ITEMS SEEN IN THESE VIDEOS:
https://www.amazon.com/shop/tomstrainsandthings
ARDUINO INFORMATION:
https://tomstrainsandthings.com/arduino
⚙
If you would like to help with translating this or any other video of mine, click this link: http://www.youtube.com/timedtext_cs_panel?c=UCE1TsLOIG2wxBZ7fe8512qw&tab=2
⚙
Subscribe To This Channel https://goo.gl/Af3bK0
Watch This Video Most Popular https://goo.gl/tFshUw
BECOME A PATRON
https://www.patreon.com/TomKvichak
CONTACT INFORMATION:
tomstrainsandthings@gmail.com
https://tomstrainsandthings.com/
https://twitter.com/TomKvichak
https://www.instagram.com/tomkvichak/
https://www.facebook.com/modelrailroadingbytom/
S U P P O R T THIS C H A N N E L
Patreon: https://www.patreon.com/TomKvichak
Social BlueBook: socialbluebook.com/c/tomkvichak
Amazon Link: http://amzn.to/2onje7t
Web Page: https://tomstrainsandthings.com/
PayPal : https://paypal.me/tomstrainsandthings
TubeBuddy : https://www.tubebuddy.com/TomKvichak
Web Hosting: www.1and1.com/?kwk=512227192
PLAYLISTS OF INTEREST:
What You Should Know Before Starting Your Model Railroad
https://www.youtube.com/playlist?list=PLjjhnrIKSTSi3vSZbz0gPxhZAPWvw9eyK
Useful Tools For The Model Railroader
https://www.youtube.com/playlist?list=PLjjhnrIKSTSgADOj1VFiGe9chmGdrNBCs
Model Railroading For Beginers
https://www.youtube.com/playlist?list=PLjjhnrIKSTShrzvkLrtppcNJ0zObTcDyv
Electrical Projects Videos
https://www.youtube.com/playlist?list=PLjjhnrIKSTSg3vBnObEMQzzProQXMBnge
Wiring On Your Model Railroad
https://www.youtube.com/playlist?list=PLjjhnrIKSTShW9IeN-sVYz8fgRDqq_4Fo
Disclaimers: all opinions are my own, sponsors are acknowledge. Affiliates are: Amazon, TubeBuddy, 1&1, & Magix GmbH
Видео Is It Worth Tearing Down A Printer For The Parts? канала Toms Trains and Things
It took me over 2 hours to get the printer apart and seperate the good parts from the not so useful parts. There were much less useful parts that discard-able parts in this project.
This video was recorded in April 2018 and has been hiding in my computer ever since then. I rendered it and never uploaded it to YouTube. I changed the intro and ending in this video, but the middle remains the same. There was about a 30 minute section that I reduced to a few minutes where I was fighting the unforgiving frame of the printer.
SHOP FOR ITEMS SEEN IN THESE VIDEOS:
https://www.amazon.com/shop/tomstrainsandthings
ARDUINO INFORMATION:
https://tomstrainsandthings.com/arduino
⚙
If you would like to help with translating this or any other video of mine, click this link: http://www.youtube.com/timedtext_cs_panel?c=UCE1TsLOIG2wxBZ7fe8512qw&tab=2
⚙
Subscribe To This Channel https://goo.gl/Af3bK0
Watch This Video Most Popular https://goo.gl/tFshUw
BECOME A PATRON
https://www.patreon.com/TomKvichak
CONTACT INFORMATION:
tomstrainsandthings@gmail.com
https://tomstrainsandthings.com/
https://twitter.com/TomKvichak
https://www.instagram.com/tomkvichak/
https://www.facebook.com/modelrailroadingbytom/
S U P P O R T THIS C H A N N E L
Patreon: https://www.patreon.com/TomKvichak
Social BlueBook: socialbluebook.com/c/tomkvichak
Amazon Link: http://amzn.to/2onje7t
Web Page: https://tomstrainsandthings.com/
PayPal : https://paypal.me/tomstrainsandthings
TubeBuddy : https://www.tubebuddy.com/TomKvichak
Web Hosting: www.1and1.com/?kwk=512227192
PLAYLISTS OF INTEREST:
What You Should Know Before Starting Your Model Railroad
https://www.youtube.com/playlist?list=PLjjhnrIKSTSi3vSZbz0gPxhZAPWvw9eyK
Useful Tools For The Model Railroader
https://www.youtube.com/playlist?list=PLjjhnrIKSTSgADOj1VFiGe9chmGdrNBCs
Model Railroading For Beginers
https://www.youtube.com/playlist?list=PLjjhnrIKSTShrzvkLrtppcNJ0zObTcDyv
Electrical Projects Videos
https://www.youtube.com/playlist?list=PLjjhnrIKSTSg3vBnObEMQzzProQXMBnge
Wiring On Your Model Railroad
https://www.youtube.com/playlist?list=PLjjhnrIKSTShW9IeN-sVYz8fgRDqq_4Fo
Disclaimers: all opinions are my own, sponsors are acknowledge. Affiliates are: Amazon, TubeBuddy, 1&1, & Magix GmbH
Видео Is It Worth Tearing Down A Printer For The Parts? канала Toms Trains and Things
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
How to Salvage Usefull Parts from Printers and ScannersEEVblog #1302 - Scrapping a Dumpster Laser Printer For Parts7 Things You Can Reuse Inside An Old Flatbed Scanner / #01: HOW TO Disassemble & Recover Parts #techHow To Get Cheap Electronic Components (Salvaging From Circuit Boards)An Old Microwave And What To Do With It - An Electromagnet And A Phone ChargerPrinter broken? - don't throw it away - DISASSEMBLING & salvaging - PT. 1How To Add Switches To A Drop Down Access BridgeUseful Parts from Old PrinterHow To Make Money Reselling Printers Without Much Work.How To Salvage A Commercial Printer for Electrical And Mechanical Parts 049Parting out a HP Printer for Electrical PartsSalvaging Electronic Components from Printer that can be used in DIY CNC machine with printer partsreciclar impresora de tinta ¿podemos reciclar algo?Introduction To Arduino Made EasyI Made a Dumb Coffee Maker, Smart [Wifi Coffee Machine]Introduction to CIS sensors and how to reuse themProgramming The Digitrax DS64 & Other OptionsWhat Can You Salvage From A Printer?Old printers are worth to teardown!