CB400sf Vtec3 2005 Coolant Replacement (Part 2)

-Drain coolant from lowest point of bike (WaterPump drain screw/ lowest Coolant hose)
-Remove Radiator Cap
-After draining, reconnect the coolant drain source
-Fill Radiator with approx 1800ml of coolant (Wrong info in vid, Sorry)
-Fill Expansion Reservoir/ Spare container with approx 200ml of coolant (Wrong info in vid, Sorry)
-Warmed up bike few times, wait for AirPocket to escape
-Pressed the coolant hose around bike so to help speed up this process of removing air bubble
-Refill radiator till coolant at brim
-Recap Radiator
-Recap Expansion Reservoir/ Spare container
-Replace tank
-Reconnect Fuel sensor wire (Right side)
-Reconnect 2 Fuel line (Left side)
-Tightened tank screw (Size 12mm screw)
-Reinstall 2 side panel
-Reinstall seat
& your are done with your coolant change
Bike : CB400sf Vtec3
Year : 2005
Location : Singapore
Stay tune!

Feel free to comment

Like & Subscribe to my channel if you like it.
DISCLAIMER :
I'm not Liable for any damage(s) that may occur to your bike from this Video. This is just MY Video of how I DIY my stuff on MY bike. I'm just sharing my knowledge of what I know. I Maybe wrong, still in process of learning. Be gentle with your comment.:)
Please do so at your own risk or whichever u deem Fit/ Safe.

Thank You.

Видео CB400sf Vtec3 2005 Coolant Replacement (Part 2) канала Hairi