Led Matrix PL9823 + Glediator
My noncompletely working led matrix (pl9823 8mm leds). Running from glediator on pc to arduino nano to display. I have problems with power i think, the 7 lower lines of leds flicker sometimes as seen in the video (the flashes) and last line almost flickers always. I have added 100nf caps to all leds, and power-inject top left and bottom middle. (some flashes are audiotriggers from glediator)
The powersupply is a cheap pc supply with supposedly 35A 5v line, but i don't think so, so i have ordered a dedicated 40A supply.
I have calculated 493leds*60mA/led so 28Amp should it draw.
I don't run this video with 100% power to leds, because it's so blindingly bright the camera could not take it. I think i run about 30-40%.
PS: i will NEVER solder one of these again, what a incredible work.
Every led 4 pins, wires between all in/outs, 493 leds, 493 caps, 58 powerwires, 493 drilled holes, 986 hotglues on leds. Gahh...
The music in the background are C64 remixes from http://remix.kwed.org/.
Glediator free software: http://www.solderlab.de/index.php/software/glediator
Видео Led Matrix PL9823 + Glediator канала Anders Erlandsson
The powersupply is a cheap pc supply with supposedly 35A 5v line, but i don't think so, so i have ordered a dedicated 40A supply.
I have calculated 493leds*60mA/led so 28Amp should it draw.
I don't run this video with 100% power to leds, because it's so blindingly bright the camera could not take it. I think i run about 30-40%.
PS: i will NEVER solder one of these again, what a incredible work.
Every led 4 pins, wires between all in/outs, 493 leds, 493 caps, 58 powerwires, 493 drilled holes, 986 hotglues on leds. Gahh...
The music in the background are C64 remixes from http://remix.kwed.org/.
Glediator free software: http://www.solderlab.de/index.php/software/glediator
Видео Led Matrix PL9823 + Glediator канала Anders Erlandsson
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Make An L.E.D Illusion Mirror!](https://i.ytimg.com/vi/b2bvWArORSc/default.jpg)
![Make your own 10x10 LED Matrix](https://i.ytimg.com/vi/D_QBlFIQk-o/default.jpg)
![How to make a DIY LED Matrix Table](https://i.ytimg.com/vi/GWAv78rhlSs/default.jpg)
![10x10 RGB LED Matrix-Tisch mit WS2801 Controller](https://i.ytimg.com/vi/yn2jjPMtViM/default.jpg)
![Large 8x8 LED Matrix Assembly Part 1 - jolliFactory](https://i.ytimg.com/vi/mb4dAL6OUFA/default.jpg)
![PIC controlled LED Matrix (7x31)](https://i.ytimg.com/vi/PA1v0oSxQvc/default.jpg)
![MOD-LED8x8RGB intelligent RGB LED MATRIX driven by Arduino](https://i.ytimg.com/vi/EImDHxnk6Pw/default.jpg)
![Arduino Spectrum Analyzer | 16x32 RGB LED-matrix](https://i.ytimg.com/vi/OOgNcSBfHvI/default.jpg)
![Arduino & 400 Neopixel WS2812 RGB LED matrix project](https://i.ytimg.com/vi/JZDQ7BNRFM8/default.jpg)
![3D Printed Led Pixel Box with Glediator](https://i.ytimg.com/vi/3hVyeRq1D9g/default.jpg)
![Spinning RGB LED Ball II](https://i.ytimg.com/vi/sO2-tqoyGik/default.jpg)
![3 WS2812 LED strips .](https://i.ytimg.com/vi/2FXs1arWMrE/default.jpg)
![Jinx demo with 512 P9823 LED matrix in Glediator](https://i.ytimg.com/vi/HOy3Hqdpo60/default.jpg)
![Large 8x8 LED Matrix DIY Kit - jolliFactory](https://i.ytimg.com/vi/YZdzjnqtVZc/default.jpg)
![ledmatrix 20x15 Glediator/Jinx/Arduino](https://i.ytimg.com/vi/nH7-74nH-Wg/default.jpg)
![2m x 2m LED Disco Wall (256 RGB LEDs, Arduino, Glediator)](https://i.ytimg.com/vi/Opklnmm8IP4/default.jpg)
![Ansteuerung einer LED-Matrix mit Glediator](https://i.ytimg.com/vi/8RjSZSk7zDw/default.jpg)
![Led Matrix 16x32 + Arduino Uno R3 - PWM Greyscale mode](https://i.ytimg.com/vi/MAD7nMsLMcs/default.jpg)
![Awesome WS2811 LED Advent arrangement controlled by Arduino and Glediator](https://i.ytimg.com/vi/PRP3TywUacY/default.jpg)
![RGB LED Coffee Table (Glediator project)](https://i.ytimg.com/vi/FJGqkkIuvLU/default.jpg)